Fusion 2500d Cutting Out

[Mass Car Audio 10+ year member]

NO i have 2 80 Fuses.....wired w/the capacitor. and a 80amp fuse under the hood on the 1/0ga battery wire.

Why 80 amp fuse's ? you need to replace those with a 150 or 160 amp fuse.

 

[allout13 10+ year member]

4gauge is fine, but if you can get all 1/0 and use wire reducers. its what I did. I was fine running mine at 1 ohm with only 1 run of 1/0 cca wire and a deka intimidator 9a31. at full tilt it only dropped to 12.5, but since you plan on running at .5 definantly do the big three and get you a nice battery or two. cap isnt really necessary

and fyi amps originally came with a 200amp fuse so I would try and fuse it that high

 

[Donks 10+ year member]

4gauge is fine, but if you can get all 1/0 and use wire reducers. its what I did. I was fine running mine at 1 ohm with only 1 run of 1/0 cca wire and a deka intimidator 9a31. at full tilt it only dropped to 12.5, but since you plan on running at .5 definantly do the big three and get you a nice battery or two. cap isnt really necessary
and fyi amps originally came with a 200amp fuse so I would try and fuse it that high

what about this Lightning Audio 200amp fuse and holder for $10 bucks?? i know Lighning Audio is trash but should it matter for the fuse and fuse holder?

http://columbus.craigslist.org/ele/974863831.html

 

[CRXBMPN 5,000+ posts]

that works, the amp is junk though lol

 

[Donks 10+ year member]

what amp is junk? my fusion 2500d??

 

[nikhcePtcejorP 10+ year member]

That Fusion Amp is not junk at all.

Great Power.