full dd system build reg cab chevy

[burzendowski 10+ year member]

Nice, I have an 03 extended cab. Do you ever go to http://www.fullsizechevy.com?
they'd like to see this build

ya im a member but i dont visit often . maybe ill post it up for those guys

 

[cf2004 10+ year member]

whats the dims on your box?

 

[burzendowski 10+ year member]

whats the dims on your box?

14.5 x 50 x 5/9 its 1.5 38hz

 

[cf2004 10+ year member]

14.5 x 50 x 5/9 its 1.5 38hz

nice

 

[thevic24 5,000+ posts]

man, if you could use carbon fiber for the ova. i think that would look sick.//content.invisioncic.com/y282845/emoticons/cool.gif.3bcaf8f141236c00f8044d07150e34f7.gif

-vic

 

[mobeious 10+ year member]

box looks great man

 

[burzendowski 10+ year member]

box looks great man

hope it sounds as good as it looks . i used 3/4 for the front trim panel vs 1/2 fits perfect . this way the woofer will never hit the back of the seat .//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

 

[Kastlez_ 10+ year member]

Nice build, I just finished my 1510 build a couple weeks ago.

Everything was just about the same 3cubes@38hz

 

[burzendowski 10+ year member]

Nice build, I just finished my 1510 a couple weeks ago.
Everything was just about the same 3cubes@38hz

so how does your 1510's sound ? what do you have for power?

 

[Kastlez_ 10+ year member]

so how does your 1510's sound ? what do you have for power?

I have (1) saz1500 on the two of them so roughly around 700w each

although i've never played them full tilt because they're not broken in yet.

How much power are you going to be throwing at yours?

 

[burzendowski 10+ year member]

I have (1) saz1500 on the two of them so roughly around 700w each
although i've never played them full tilt because they're not broken in yet.

How much power are you going to be throwing at yours?

about the same a dd m1a at 2ohms around 6-700 watts rms

 

[AllDayMJ 10+ year member]

shoulda just built the box out of CF //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

but on a real note, you should cover the box in CF cloth and paint the in-lay a cm red to the DD logo, few clear coats, and that thing would look sick..otherwise piano black always looks good //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif oh and paint the rolled lip on the inlay a white to match the DD logo too..it would be on a new level if you did that.

 

[burzendowski 10+ year member]

update. trucks wired and the amps are mounted. need to install the hc800 , carpet box, install the angle door spacers...

 

[DB-Audio 10+ year member]

looks nice you should either do the straight up carbon fiber cloth or get red carbon fiber cloth and wrap it with that

 

[burzendowski 10+ year member]

got most of it done today , still need to install the kinetik hc800....