SOLD FS: Rockford Fosgate P3001

duce2k
10+ year member

Member
83
0
TX
I'm selling my RF P3001 mono amp. I've had it installed for about a year 1/2 and it has pushed 2 8"subs and now an RE SR10 with ease. The amp works fine but I want to upgrade now. The amp comes with both end caps, I took it off for the pics (sorry for the horrible night pics, I took them at night). Looking for $75 shipped to the lower 48.

P4290029.jpg


P4290028.jpg


 
* Rockford P300-1 300W Mono Car Amp Punch Series.

* Features:

o 12dB/octave crossover.

o 4 Gauge power/ground terminals.

o Audiophile grade speaker connections.

o MOSFET output stage.

o MOSFET power supply.

o Top Mounted LED Indicators.

* Features:

o Number of Channels: 1.

o Rated Power continuous power:

150W x 1 @ 4-Ohms RMS.

300W x 1 @ 2-Ohms RMS.

o Total Power:total sum of 'rated power' 300 Watts.

o Dynamic Power powercube measurement (info):

240 Watts x 1 @ 4-Ohms 0 degrees Res.

404 Watts x 1 @ 2-Ohms 0 degrees Res.

o Bridgeable: No.

o Efficiency (average):

69% @ 4-Ohm.

65% @ 2-Ohm.

o Crossover Controls:

High-Pass (HP): 50Hz-500Hz 12dB/octave Butterworth

Low-Pass (LP): 50-500Hz 12dB/octave Butterworth.

o Tone Controls:

Punch EQ2 Bass: 0dB to +18dB @ 45Hz and/or.

Front Punch EQ2 Treble: 0dB to +12dB @ 12kHz.

Function depends upon LP/AP/HP switch position.

o Signal Input Low level: 1 RCA pair.

o Signal Output n/a.

o Power Input Connector Block.

o Power Wire Gauge 4 AWG.

o Speaker Output Connector Screw terminal barrier strip.

o Speaker Wire Gauge 8 AWG to 18 AWG.

o Heat Sink Type Cast aluminum.

o Cooling Convection.

o Remote Controls Optional PEQ Remote Punch EQ(overrides built-in Punch EQ2).

o Visual Indicators:

Power.

Thermal.

Protect.

o Circuit Topology Class Class A/B.

o Frequency Response 20Hz to 20kHz +/- 1.0dB.

o Shipping Weight 6.34 Lbs. (2.87 Kg.).

o Dimensions (HxWxL):

2.25 x 7.625 x 9.0 (in).

5.71 x 19.37 x 22.80 (cm).

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

I would pull it and bench test it with a 12v battery. Ive had Bulbs burn out in the past and the amplifier works excellent. They will burn out at...
1
1K
roger that, just got one from sonic electronix for $189. thanks for the help
18
2K
Maybe ask RF tech support. I wasn’t able to find that either. Sonic electronics and Crutchfield just use the same description as the rf site. True...
1
2K
After looking at amazon for kicker q product details, it showed rms of 1200@2ohm If you’re at 2ohm you’re not feeding it enough power. At 1ohm...
1
2K

About this thread

duce2k

10+ year member
Member
Thread starter
duce2k
Joined
Location
TX
Start date
Participants
Who Replied
Replies
14
Views
3,741
Last reply date
Last reply from
duce2k
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0
445387485_1610561083127261_6762343569694877677_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top