Sold FS: 12" Custom TC9!

[Pyro_By_Nature 5,000+ posts]

Ok, well.It'll be tough to see this sub go, but I honestly won't have a use for it pretty soon. I need the money to assist in larger set-up coming soon.

The basics: Dual 2 ohm, 4 spoke basket, tc9 motor, cracked dustcap //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif I was going to order a new one but I forgot about it. It's a solid sub, It'll be happy with anywhere from 800-1200 watts for daily driving.

For the longest time I fed it 200-300 watts and it didn't move all that much, hit a 136.5 on the TL, at the dash sealed up in a daily driving box.With 1200 watts now it's doing over a 140 in the same box.

Unfortunately, it's no longer loud enough for my tastes and I'll be upgrading.It's MORE than loud enough for a lot of people, but honestly, not for me.This set-up HAS hurt some ears in its day.What does it sound like?Well, I've had it sealed before and I REALLY enjoyed the sound.It had the perfect sound for me, but the output thing comes up again.

It has the typical scratches/scuffs on the back, somehow the magnet boot got cut when it was removed.If it really bothers you, you can get a new one.I have some older pics but I'll try to grab some today or tomorrow for you guys if there's interest.

Let's say $175 + shipping VERY FIRM!!!

 

Please DO NOT make shipped offers! Actual shipping will be caculated depending on your location. I DO NOT accept overpayment.I WILL accept a personal check, but it must be sent priority mail and it has to clear before the sub will be shipped.If paying by paypal, you pay the fee. I won't accept payment from somebody with 10 posts. I am open to some trades.Post or PM me with what you have and I'll give you a simple yes or no.

BTW: Box sizes, I'd say around 1.3-1.5cf. for sealed and 2.5cf. for ported tuned to 28hz or 32hz would be optimal for most musical tastes.

Click to read more...

 

[Pyro_By_Nature 5,000+ posts]

Up!

 

[Pyro_By_Nature 5,000+ posts]

Ttt!

 

[Hintzyboy 5,000+ posts]

mounting depth?

 

[Pyro_By_Nature 5,000+ posts]

It's around 6 3/4" if I remember correctly.But just say 7" to be on the safe side.

I just took some pics tonight, I'll upload them in a little bit.

 

[Hintzyboy 5,000+ posts]

magnet width?

 

[Pyro_By_Nature 5,000+ posts]

Around 8" I think.I got the perfect pic for ya

Old pic, new ones will be coming up shortly.

 

[mazdakid 5,000+ posts]

ill give you my mt motor for it

 

[Pyro_By_Nature 5,000+ posts]

No use for a motor right now.Thanks for the offer tho.

 

[Hintzyboy 5,000+ posts]

let me do some calculations tonight, I'm working with a 97 std. cab s10, so space is VERY limited. Might be able to just squeeze it in.

 

[Pyro_By_Nature 5,000+ posts]

Ok, let me know either way.Also, let me know if you need help figuring out a box design.

Bump!

 

[Pyro_By_Nature 5,000+ posts]

Bump.

 

[dbman150 5,000+ posts]

trade an bnib ed19ov2 for it

 

[Pyro_By_Nature 5,000+ posts]

No thanks, doing an SPL set-up and I don't like ED (as a company).I appreaciate the offer though.

Ok people, I need RE 35.1's, ampman 1500.1's, or better audio 1600.1's, or any other amp that has the same board!

 

[saywhat? 5,000+ posts]

why that board...... ??? not exactly the best/powerful amp to be using in an SPL setup.

 

[Pyro_By_Nature 5,000+ posts]

They fit my application and seem to be easily found //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif Besides, I need max power from 12.4-13.2v and I can't afford 4 Z1's.