Front stage for a 149.9 bassracer?!?!?

[SPLluminator 10+ year member]

Wait whats wrong with 1 supertweeter and 1 deltalite 10" in each door? Or would selenium 6" be better? Which ones? I got soo much advice and i dont know what to look into.

Looks like these are my options:

2 selenium tweets, 4 6" selenium mids

Or

2 selenium tweets, and 2 deltalite 10" mids

Or

Idk what other midbass suggestions there are?

 

[JL Audio 5,000+ posts]

Wait whats wrong with 1 supertweeter and 1 deltalite 10" in each door? Or would selenium 6" be better? Which ones? I got soo much advice and i dont know what to look into.

I simply suggested the selenium mid for size/brand..

Nothing wrong with 1 10"/1tweet per door, no one knows what you'd like but you.. so I say go with what YOU think would do good, you can always ADD if all else fails.

 

[SPLluminator 10+ year member]

I simply suggested the selenium mid for size/brand..
Nothing wrong with 1 10"/1tweet per door, no one knows what you'd like but you.. so I say go with what YOU think would do good, you can always ADD if all else fails.

Well i think itll be easier to run the 6's and they are cheaper. Now i just need power? What would you guys suggest for good power for these? Im guessing a real big 4 channel with mids on 2 channels and tweets on other 2? Or 3 2channels or what? lol.

 

[JL Audio 5,000+ posts]

Well i think itll be easier to run the 6's and they are cheaper. Now i just need power? What would you guys suggest for good power for these? Im guessing a real big 4 channel with mids on 2 channels and tweets on other 2? Or 3 2channels or what? lol.

you should have seen my old wiring diagram for 24 of the 6" mids and 48 of the ST350s...

LOTS of 100.2s were going to be used.. but I traded my astro //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif.

 

[SPLluminator 10+ year member]

you should have seen my old wiring diagram for 24 of the 6" mids and 48 of the ST350s...

LOTS of 100.2s were going to be used.. but I traded my astro //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif.

Ok, seems like 3 100.2's would be easiest. Only bad thing is the 8 ohms. I wont get much power from them will i?

 

[JL Audio 5,000+ posts]

Ok, seems like 3 100.2's would be easiest. Only bad thing is the 8 ohms. I wont get much power from them will i?

wire them together ^_^ lol.

 

[SPLluminator 10+ year member]

wire them together ^_^ lol.

lol. Like 2 midbass per channel? obviosly thatd bring them down to 4 ohms per channel. But i couldnt wire the tweets to them too because then i cant set my Xover points.

 

[JL Audio 5,000+ posts]

lol. Like 2 midbass per channel? obviosly thatd bring them down to 4 ohms per channel. But i couldnt wire the tweets to them too because then i cant set my Xover points.

yea i mean the mids together seperate from tweets but... tweets.. well they'll have to stay at 8 ohm.. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

i'm not the least bit helpful sometimes //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

 

[SPLluminator 10+ year member]

yea i mean the mids together seperate from tweets but... tweets.. well they'll have to stay at 8 ohm.. //content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gifi'm not the least bit helpful sometimes //content.invisioncic.com/y282845/emoticons/redface.gif.62fdbfe1a101588a808c4cff71bcb942.gif

Ok. Sounds great. I may need to get another sundown 125.2(had 2, sold one) or see if i can get 2 matching cheaper 100rmsx2 @ 4ohm amps. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Thank you sir for your help

 

[JL Audio 5,000+ posts]

Ok. Sounds great. I may need to get another sundown 125.2(had 2, sold one) or see if i can get 2 matching cheaper 100rmsx2 @ 4ohm amps. //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif Thank you sir for your help

i'm sure you'll find something, I wish i could afford anything at this point lol.. sucks trying to get back into it especially on a budget now.

 

[SPLluminator 10+ year member]

i'm sure you'll find something, I wish i could afford anything at this point lol.. sucks trying to get back into it especially on a budget now.

Yes, this is my first big build but im not trying to loose my life savings on it either haha. I got the car for free, the sonances for 525 shipped, the 3250.1 for 550(got screwed too cuz the new ones came out haha), and 2 C & D tech. batteries for 360 shipped. Over all not too bad for 149.9 bassracer/daily driver

 

[Papermaker85 5,000+ posts]

id say 2 pairs of midline comp sets and something like a SS4.920 or a zapco 1000.4...

i think the slc rainbows and the alpine X pros would suffice..

 

[SPLluminator 10+ year member]

id say 2 pairs of midline comp sets and something like a SS4.920 or a zapco 1000.4...i think the slc rainbows and the alpine X pros would suffice..

Im pretty much set on 4 selenium 6's, i just dont know whether to go with 2 tweets or 4. 4 would lower my impedience to 4 ohms instead of 8.

Or i could run 8 of the pyle pro mids and 4 of the tweets.

 

[massiveaudiocw 10+ year member]

You say you want to keep it on a budget but dont list a budget? IMHO, I think there is nothing wrong with pro audio (the higher end stuff, for applications such as yours) but I wouldnt run four 6.5's. IMHO you would be fine with a single set of B&C 6PEV13 and B&C DE35.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=294-650

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=294-580

Another option would be a pair of Beyma Pro6MI or Beyma Pro65ND and a pair of AST05.

http://usspeaker.com/Beyma%20Car%20Audio-1.htm

A cheaper option would be Dayton PA165-8, Dayton PK165-8, Whip Audio W6M8200, or Powerbass 4XL-65-92.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=295-015

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=295-020

http://www.teptronics.com/w6m8200.html

http://www.teptronics.com/4xl6592.html

 

[SPLluminator 10+ year member]

Why wouldnt you recommend 4 in each door? Im between the 8 pyle pros and the 4 selenium 6's. What would you recomend. And idk how many tweets i shoudl do. Im thinking 2 in each door to keep it at 4 ohm but i could do 1 in each door.