Free Box designs.

[jesse59672 10+ year member]

2 12" pioneer 5000spl going in the bed of silverado truck,external mesurments are w 46 x h 17.5 x d 19 tuned@35 ( inverted setup, seperate chambers)sub would be mounted in the 46 x 17.5 section of the box,using 1" mdf

p.s.

depth could be changed if you think of a better size box (between 19-22" )

thank you for your help

I used RE's calculator. the subwoofertools.com won't let you change the board thickness. hope you like it.

3 cubes per chamber @ 35hz

individual chambers:

Bottom Plate: 23 x 22

Top Plate: 23 x 22

Left Plate: 21 x 15.5

Right Plate: 20 x 15.5

Back Plate: 23 x 15.5

Front Plate: 19 x 15.5

Port L1: 17 x 15.5

Port L2: 5 x 15.5

 

[poundindak69]

how about one for 2 kicker L7 12's it has to be 13high,30wide,22 deep and tuned to 32hz thanks

 

[Ali1 10+ year member]

box for a single BTL with 28X28X13 dimensions tuned to 33-34 hz? sub facing the upwards?

 

[chinxtaboi 10+ year member]

single 12" memphis m3.. 31w x 14h x 13d at 32hz.. and 2 12" massive cw 48w x 18hx 18d tuned around 38-40

ive been tryin to make plans for these boxes on winisd and re.. but a lot of people say re is no go and winisd.. i get too confused.

thanks

 

[Problem Child 10+ year member]

Hey I need a box for 2 12's with 2 slot ports on the outside walls tuned to 30 hz pointed the same direction that the subs are, the box size is 37.5 wide, 18 tall, and 18 deep, here are my subs and info http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1880

 

[moorezy 10+ year member]

Four Pioneer Premiere TS-W1207D2 (12") tuned 34-36hz dimensions 36 wide x 30 deep x 14 high. All mounted same plane ( top ).

 

[lowlife502 10+ year member]

i have a 95 honda civic 2dr coupe and running 2 12" Mach 5 SPL 12's powered by 2 MTX ELITE4000

need a box designed for spl /street /drive by spl

after the box is built and put in my trunk will be walled off only seeing the port and subs. so prefer subs facing inside the car

15"H

38"W

28"D

thanks

Bsihop

 

[jag09 10+ year member]

91 Jaguar VandenPlas

WxHxD

25x16x20 tuned to 35hz

12" atomic ap/spl

 

[lowlife502 10+ year member]

ok forget that box.....need box now for 18" solo X in honda civic trunk facing in think i have one but would like to see what u could come up with

19H

38W

31D

 

[slappinX 10+ year member]

i need a box for a ssd in my CRX. sub up port box.

max dimensions

12"H

18"D

30"W

tuned to 33Hz

thanks

 

[Konstantin 10+ year member]

Can someone help me with a design for a single Kicker L7 12", I was thinking of 3-3.25 cubes at 34hz? Its going inside a 4runner and I have lots of trunk space so dimensions can be anything.

thanks //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[blkmrideon22s 10+ year member]

i need a box for a single fi bl 18 thats going in a 1991 ford explorer i have 40Lx40Wx18L to work with. i looking for sub up port in the back .tuned to 32 hz

 

[emd2260 10+ year member]

how about a ported box for a 15" Fi Q...going into an '01 ford taurus sedan...would like ported, anywhere from 30-35 hz (you can use your expertise) would like it to be no more that 30w x 21d x 17 h...thanks!

 

[SmurfyGotMojo 10+ year member]

94 Fleetwood

2x Memphis M3 12"s

35hz please. Nice vent rectangular maybe?

 

[nastyone 10+ year member]

i got a max of 20"d x 18"h x 48"w to play with in a 98 ford windstar would like a slot port tuned in the 32 to 38 hz range it is for 2 12" strokers parameters are fs 32.6 hz Qts 0.72 Qms 9.94 Qes 0.776 Vas1.31 cu ft any help would be very great