First setup...

you will need to take the speakers out of the rear deck and possibly take the insulation out that is behind the rear seat. You can 2 15"s in there sealed or 2 12"s in there ported without having a odd shaped custom box. I have an 81 cutlass...almost same trunk
hmm....welll i could go 2 maw15 sealed...

well w/ my Sub budget...and my new found revelation...w/ that trunk space...

what are some good 15s in my budget sealed...and 12s in my budget ported.

i saw these...

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16864

http://www.onlinecarstereo.com/CarAudio/ProductDetail.aspx?ProductID=16868

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=3416

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=1833

http://www.woofersetc.com/index.cfm?fuseaction=product.display&Product_ID=2844

http://www.soundsolutionsaudio.com/shop/index.php?act=viewProd&productId=50

 
R's sound like a good choice....but please dont use a sealed box for 2...I would definately go 1 ported if you go this route.

Also the Maw is a great choice and seems to be a fgreat subwoofer for the price.....(never heard one tho....//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif)

 
okay here are some choices...

1 Fi SSD 15 ported 4 cu ft. tuned to 33hz

1 Type R ported 4 cu ft. tuned to 35hz

2 Maw15s sealed...4 cu ft.

2 Diamond Audio D3s selaed 4 cu ft.

 
anyone...

Hmmm....

Fi SSD 15 ported 3.5cu ft. tuned to 32hz

or

SI Mag(new) ported 1.75cu ft. tuned to 33hz

 
For sure take out the rear deck speakers....they are probably 4x10's which usually sound like poo anywayz...

also..

Set some money back for deadening or you will regret it.

I have an old Bonneville and the trunk is similar.

focus alot on the lid.....and underneath between the lid and the back window....it will have some definite rattling and flexing going on if you get some decent output......Also, the gas cap is probably behind the license plate, so try to get it tightened good and maybe get some mat on the spots that touch at the top where it flips down......

hope this helps

good luck

curtis

 
im leanin towards...the 1 mag 12....ported...or 2 maw15's sealed....idk the maw's would have pretty decent sq and get pretty loud....and be cheaper

im working a partime job....so money is kinda tight

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This would go a long way to alleviating the dimming issue, up to around 4000 watts. It can handle 100A continuous and up to 285A 7 second burst...
6
682
I had some 9500 series 12s by MTX that were some slamming subs!! Should have kept those along with those torpedo RE XXX 12s
15
1K
I am doing an all JL audio instal on my new F250 SD . I'm using a Audio Control LC 5i Pro with a JL Audio XDM 700/5 and C3-650's in all 4 doors...
7
979
Id sit down and figure out exactly what all you will be installing for amperage consumption and add another 10-15% amperage useage on top of that...
21
2K

About this thread

KingSham

10+ year member
Senior VIP Member
Thread starter
KingSham
Joined
Location
Ky
Start date
Participants
Who Replied
Replies
30
Views
1,626
Last reply date
Last reply from
kizzo
Screenshot_20240531-022053.png

1aespinoza

    May 31, 2024
  • 0
  • 0
Screenshot_20240524_202505_Samsung Internet.jpg

winkychevelle

    May 24, 2024
  • 0
  • 0

New threads

Top