First Post!!! HELP~

[etl45 10+ year member]

HI! wassup all~~~

i just got into the audio stage so im kinda new to all this and in the dark!

i just recently purchased a kicker zx750.1 amp! here are the specs if you need them~

Model: ZX750.1

Class: D

Power (watts) mono: 750 @ 2 ohms

Remote bass control: yes

Length (in., cm): 14-11/16, 37.3

Height (in., cm): 2-1/8, 5.4

Depth (in., cm): 9-5/8, 24.4

Frequency response: 25Hz-200Hz, +0, -1dB

Input sensitivity (high level): 250mV-10V

Input sensitivity (low level): 125mV-5V

Signal-to-noise ration: >95dB, a-weighted, re: rated power

Active crossover: 24dB/octave, variable 50Hz-200Hz, low pass only; 24dB/octave high-pass subsonic filter fixed at 25Hz

KICKEQ boost: Selectable to +12dB, centered at 40Hz

12dB/octave subsonic filter defeatable @ 25Hz

NOW i want to get TWO 10's compVR subs to connect to my amp! soo 2 tens!

do i want to get the 2ohm subs or 4ohm subs? they come in two differnt options..

no idea what to get.. just someone tell me please haha! i dont even know what ohm's are haha!

but i just want some good bass! strong bass! clean bass! haha

SO 2ohms or 4ohms subs to go with my amp?

THANKS!

Click to read more...

 

[BushJ311 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/rolleyes.gif.c1fef805e9d1464d377451cd5bc18bfb.gif//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

two dual 2 subs

 

[GAM3OVR 5,000+ posts]

listen to bushJ311!

 

[lyttleviet 10+ year member]

HI! wassup all~~~
i just got into the audio stage so im kinda new to all this and in the dark!

i just recently purchased a kicker zx750.1 amp! here are the specs if you need them~

Model: ZX750.1

Class: D

Power (watts) mono: 750 @ 2 ohms

Remote bass control: yes

Length (in., cm): 14-11/16, 37.3

Height (in., cm): 2-1/8, 5.4

Depth (in., cm): 9-5/8, 24.4

Frequency response: 25Hz-200Hz, +0, -1dB

Input sensitivity (high level): 250mV-10V

Input sensitivity (low level): 125mV-5V

Signal-to-noise ration: >95dB, a-weighted, re: rated power

Active crossover: 24dB/octave, variable 50Hz-200Hz, low pass only; 24dB/octave high-pass subsonic filter fixed at 25Hz

KICKEQ boost: Selectable to +12dB, centered at 40Hz

12dB/octave subsonic filter defeatable @ 25Hz

NOW i want to get TWO 10's compVR subs to connect to my amp! soo 2 tens!

do i want to get the 2ohm subs or 4ohm subs? they come in two differnt options..

no idea what to get.. just someone tell me please haha! i dont even know what ohm's are haha!

but i just want some good bass! strong bass! clean bass! haha

SO 2ohms or 4ohms subs to go with my amp?

THANKS!

You'll want 2 dual 2 ohm subwoofers... Use wikipedia and you can learn a bit about resistance and ohm loads if you haven't taken physics yet. It really isn't all that complicated and there are tutorials on Rockford fosgate and JLaudio's websites to teach you how to wire them up. Shoot me a PM if you need any advice and I'll do what I can for you //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[jaboran 10+ year member]

do u have a reason to get the cvrs?

 

[Buck 5,000+ posts]

2 Daul 2s HAHAHAHAHAHAHAHA!!!!!!!!!!!!!!!!

 

[etl45 10+ year member]

wow thanks for the fast reply guys!

2 duel 2ohm subs it is!