Reply to thread

Message

<blockquote data-quote="etl45" data-source="post: 5209866" data-attributes="member: 604015">HI! wassup all~~~i just got into the audio stage so im kinda new to all this and in the dark!i just recently purchased a kicker zx750.1 amp! here are the specs if you need them~Model: ZX750.1Class: DPower (watts) mono: 750 @ 2 ohmsRemote bass control: yesLength (in., cm): 14-11/16, 37.3Height (in., cm): 2-1/8, 5.4Depth (in., cm): 9-5/8, 24.4Frequency response: 25Hz-200Hz, +0, -1dBInput sensitivity (high level): 250mV-10VInput sensitivity (low level): 125mV-5VSignal-to-noise ration: &amp;gt;95dB, a-weighted, re: rated powerActive crossover: 24dB/octave, variable 50Hz-200Hz, low pass only; 24dB/octave high-pass subsonic filter fixed at 25HzKICKEQ boost: Selectable to +12dB, centered at 40Hz12dB/octave subsonic filter defeatable @ 25HzNOW i want to get TWO 10&#039;s compVR subs to connect to my amp! soo 2 tens!do i want to get the 2ohm subs or 4ohm subs? they come in two differnt options..no idea what to get.. just someone tell me please haha! i dont even know what ohm&#039;s are haha!but i just want some good bass! strong bass! clean bass! hahaSO 2ohms or 4ohms subs to go with my amp?THANKS!</blockquote>

[QUOTE="etl45, post: 5209866, member: 604015"] HI! wassup all~~~ i just got into the audio stage so im kinda new to all this and in the dark! i just recently purchased a kicker zx750.1 amp! here are the specs if you need them~ Model: ZX750.1 Class: D Power (watts) mono: 750 @ 2 ohms Remote bass control: yes Length (in., cm): 14-11/16, 37.3 Height (in., cm): 2-1/8, 5.4 Depth (in., cm): 9-5/8, 24.4 Frequency response: 25Hz-200Hz, +0, -1dB Input sensitivity (high level): 250mV-10V Input sensitivity (low level): 125mV-5V Signal-to-noise ration: >95dB, a-weighted, re: rated power Active crossover: 24dB/octave, variable 50Hz-200Hz, low pass only; 24dB/octave high-pass subsonic filter fixed at 25Hz KICKEQ boost: Selectable to +12dB, centered at 40Hz 12dB/octave subsonic filter defeatable @ 25Hz NOW i want to get TWO 10's compVR subs to connect to my amp! soo 2 tens! do i want to get the 2ohm subs or 4ohm subs? they come in two differnt options.. no idea what to get.. just someone tell me please haha! i dont even know what ohm's are haha! but i just want some good bass! strong bass! clean bass! haha SO 2ohms or 4ohms subs to go with my amp? THANKS! [/QUOTE]

Verification