06dmax00camss 10+ year member
Member
There are only 2 sets of outputs for subs on the 1000/1, how will my (3) 10W3V3s be connected?
Do I need any other fuses any where in the wiring besides the 300A ANL fuse within 18 inches of the positive battery terminal?
Both the Focal components and coaxles have spaces for connectors. However, the positive terminal is twice the size of the negative. How will connections be made with 2 different size spades? 2 different size space connectors?
The crossovers have 2 switches, one with 2 settings (6db/full) and the other with 3 settings (0, -3, -6). What do my settings need to be?
The Kicker 1/0 awg. kit came with 16 awg. remote wire, but there won't be enough for the speakers. What do you recommend on size for the speakers?
What will the settings need to be set at on both my 300/4 and 1000/1 with the speakers that I'll be using? I've listed the links to the diagrams on the amps. The components have 75W nominal power and the coaxes have 60W.
Should I use (3) 2 channel RCAs or (1) 2 channel and (1) 4 channel?
Should I spread out the subs evenly in the box, to one side, etc.? What's the best way to set them in the box behind the rear seat of a crew cab Silverado?
My truck has 2 batteries in it because its a diesel. Will that be plenty or should I another or upgrade the batteries that are already in there? Both amps are still the factory/original batteries both with 770 cold cranking amps.
Do I need to upgrade my battery's ground wire that I will be connecting the power wire to?
Link for diagrams:
http://mobile.jlaudio.com/products_amps_lineart.php?amp_id=221
http://mobile.jlaudio.com/products_amps_lineart.php?amp_id=254
Do I need any other fuses any where in the wiring besides the 300A ANL fuse within 18 inches of the positive battery terminal?
Both the Focal components and coaxles have spaces for connectors. However, the positive terminal is twice the size of the negative. How will connections be made with 2 different size spades? 2 different size space connectors?
The crossovers have 2 switches, one with 2 settings (6db/full) and the other with 3 settings (0, -3, -6). What do my settings need to be?
The Kicker 1/0 awg. kit came with 16 awg. remote wire, but there won't be enough for the speakers. What do you recommend on size for the speakers?
What will the settings need to be set at on both my 300/4 and 1000/1 with the speakers that I'll be using? I've listed the links to the diagrams on the amps. The components have 75W nominal power and the coaxes have 60W.
Should I use (3) 2 channel RCAs or (1) 2 channel and (1) 4 channel?
Should I spread out the subs evenly in the box, to one side, etc.? What's the best way to set them in the box behind the rear seat of a crew cab Silverado?
My truck has 2 batteries in it because its a diesel. Will that be plenty or should I another or upgrade the batteries that are already in there? Both amps are still the factory/original batteries both with 770 cold cranking amps.
Do I need to upgrade my battery's ground wire that I will be connecting the power wire to?
Link for diagrams:
http://mobile.jlaudio.com/products_amps_lineart.php?amp_id=221
http://mobile.jlaudio.com/products_amps_lineart.php?amp_id=254