FI and autotek opinions

[deLeo 10+ year member]

fi Q 10" powered by a Autotek SS1000.1D

its going in a 08 frontier sealed between the 2 rearseats kinda like a rear center console.

any ideas on how this will sound?

will the amp handle the weird ohm load due to the Q having a 1.4ohm/coil load?

I want to stay with autotek because i have a 75.4 for my mids/highs and i want it to look clean.

Click to read more...

 

[skmfkr 5,000+ posts]

should be fine i had a autotek sx1700 wired down to like .75 on my fi q 15

 

[deLeo 10+ year member]

since im nub in CA still... what ohm load would i have from 1.4ohms/coil? and theres 2 coils... dumb question i know

 

[deLeo 10+ year member]

bump so someone smart can chime in and tell me what my ohm load is and what they think of that combo... lol

 

[Lil Poot 5,000+ posts]

http://www.the12volt.com/caraudio/woofer_configurations.asp

 

[deLeo 10+ year member]

there is no option for 1.4ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif its 1 2 4 6 8 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

 

[azimuth 5,000+ posts]

.7 or 2.8 before rise?

 

[deLeo 10+ year member]

so the autotek sx1700 @ .7 will handle?

 

[NDMstang65 10+ year member]

It will be fine at .7, you need to choose dual 2ohm coils. That actually DCR at 1.4ohms

 

[iamamp3pimp 5,000+ posts]

there is no option for 1.4ohms //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif its 1 2 4 6 8 //content.invisioncic.com/y282845/emoticons/frown.gif.a3531fa0534503350665a1e957861287.gif

its either half of one ciol, or double one coil when dealing with 2

wire it posi to posi and neg to neg

then wire to amp

it should be okay

 

[deLeo 10+ year member]

oh so its going to run at 1.4 ohms? nvm /thread i know that amp is 1ohm stable no problem. due to my inexperience i thought it would be running under 1ohm and thats why i was questioning. thanks for the help //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[azimuth 5,000+ posts]

oh so its going to run at 1.4 ohms? nvm /thread i know that amp is 1ohm stable no problem. due to my inexperience i thought it would be running under 1ohm and thats why i was questioning. thanks for the help //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

it will be under 1 ohm. he's saying that the amp will be ok.

 

[deLeo 10+ year member]

lol so it WILL be under 1ohm but the amp will handle it.

 

[azimuth 5,000+ posts]

lol so it WILL be under 1ohm but the amp will handle it.

it will be a little under 1 ohm. i'm not sure about the amp personally, as i've never had 1.

 

[deLeo 10+ year member]

anyone who owns any autotek supersport amps know how they handle under 1ohm?