fading at high volume

[robertoyoung08 10+ year member]

sometimes at high volume the sound fades in the front speakers to the right side. I haven't quite been able to figure out why. anyone else have had this problem before?

Click to read more...

 

[phemps 10+ year member]

fades, or does one side just cut out?

 

[robertoyoung08 10+ year member]

cuts out, I guess. restores back to normal as I lower volume down.

 

[NIHL8ION]

Check ALL of your connections 1st, but I would try another HU if all checks out OK to narrow down the issue the fastest //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[phemps 10+ year member]

yep exactly what he said. There may be a connection thats becoming loose upon high vibrations, and ruling out the headunit would be a great place to continue

 

[robertoyoung08 10+ year member]

I will double check connections. I doubt its hu since it only does it on the front left side. maybe connections behind the speaker?

 

[NIHL8ION]

I will double check connections. I doubt its hu since it only does it on the front left side. maybe connections behind the speaker?

- Yes, Check EVERYTHING //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[robertoyoung08 10+ year member]

- Yes, Check EVERYTHING //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

that is going to be a b*tch. =/

 

[NIHL8ION]

that is going to be a b*tch. =/

LOL I hear ya there, maybe you have a friend who has a known to be good working HU laying around so you could just swap the HU FIRST and see what happens then before you have to really start tearing sh1t apart? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[SounDrive Pro Seller]

Happens to me occasionally. I believe the culprit was my amp, but it's 20 years old lol... You probably have a loose connection like mentioned

 

[robertoyoung08 10+ year member]

LOL I hear ya there, maybe you have a friend who has a known to be good working HU laying around so you could just swap the HU FIRST and see what happens then before you have to really start tearing sh1t apart? //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

im running 3sixty.3 off my stock nav. so trying a diff hu is almost impossible unless I wire one up just for this. lol

 

[robertoyoung08 10+ year member]

Happens to me occasionally. I believe the culprit was my amp, but it's 20 years old lol... You probably have a loose connection like mentioned

thanks for the input. im running off a fairly new jl 600/4. luckily, like with you, it only happens occasionally. but still annoying that I don't know when or why.

 

[NIHL8ION]

im running 3sixty.3 off my stock nav. so trying a diff hu is almost impossible unless I wire one up just for this. lol

ahh, ok then - gotcha... Yes then, in that case I'd start checking over ALL of those connections everywhere possible then... Has this been an issue since all of this was first installed? or did this just start happening out of the blue AFTER it was working properly at one point?