everything needed for 4 amps

[96stratus 10+ year member]

ok tell me everything needed for 4 amp installs what size wire etc 3 amps for 6 subs and 1 amp to powere 8 6 1/2s

Click to read more...

 

[misfit138 5,000+ posts]

Not every amp requires the same wiring.

- what amps? model #'s are necessary.

- what kind of alternator do you have?

- what kind of batteries? how many? model #'s are necessary.

We'll start with that...

 

[96stratus 10+ year member]

Well they are crunches here are the specs for thr 3 that are going to the 6 12s mind you these are powering 150 watt rms kickers 2 for each amp

Maximum power ratings of 2 x 125 watts @ 4 ohms, 2 x 250 watts @ 2 ohms, 1 x 500 @ 4 ohms

SEPP A/B class amplifier design

Bridgeable design

Rugged MOSFET pulse width modulation power supply

2-ohm capable A/B class 2-channel amp

System diagnostics (with LEDs) protect against current/amperage overload, short circuits, thermal overload and DC offset

High-level speaker lead inputs

Silver preamp-level RCA-type inputs

Daisy-chain line outputs

Oversized speaker terminals

Illuminated Crunch logo

and the other is a 4 channel autotek for the mids n highs

150 watts of maximum power x four channels into four ohms for a total of 600 watts of maximum power

300 watts of maximum power x four channels into two ohms for a total of 1200 watts of maximum power

600 watts of maximum bridged power x 2 channels into four ohms

Advanced MOSFET PWM power supply

Oversized speaker terminals

RCA-type preamp inputs

High-level inputs (speaker)

Daisy-chain line outputs

Mono/stereo switch

High-pass/low-pass frequency selections

Diagnostic LED power protection system to detect and warn of problems

ive ran 4 15s on a 1k mono amp with stock alt and batt with no problems this set up is roughly under 900 watts rms total power i plan to go bigger amp and 1 more battery

 

[BloodyGuts335i 10+ year member]

1 4 cha amp for 8- 6.5 speakers?

 

[twistedchild420 5,000+ posts]

10'ers are the shit!

 

[96stratus 10+ year member]

no 4 of the 8 will be wired to the internal amp in the deck the other 4 will go to the 4 channel

 

[misfit138 5,000+ posts]

Make this easy on me, man. Tell me the model # of the subs and amp.

 

[BloodyGuts335i 10+ year member]

no 4 of the 8 will be wired to the internal amp in the deck the other 4 will go to the 4 channel

oh ok...

 

[misfit138 5,000+ posts]

This system is begging for failure.

Tons and tons of mediocre equipment for the sake of what? You fucking tell me...

 

[misfit138 5,000+ posts]

no 4 of the 8 will be wired to the internal amp in the deck the other 4 will go to the 4 channel

Why not wire the 6.5"s in pairs and run them @ 2 ohms on the 4 channel amp?

 

[misfit138 5,000+ posts]

OP, give me the model # of the subs and amps so I can help you. I don't feel like deciphering the information you've given me when I could just type the model # into google...