Hi there,
I own a 2006 Dodge Ram Mega Cab and looking at building a box to run four 10's.
Looking at purchasing the following subs - JL Audio 10W3v3-4
I found a website that builds boxes for my truck and I attached a picture of the box.
I'm pretty good with building stuff and this would be easy for me to do.
These are the box dimensions
Dimensions: 59 × 11.25 × 13 in
Total Volume (CuFt): 3.11
JL Audio website says the following for the sub: Minimum Sealed Box Volume: 0.625 cubic feet
Questions I have.
1) How do I calculate the Cuft I need for four of these subs? Do I just time by 4?
2) Is it best to have one big sealed box or have dividers in the box for each sub?
Thanks for any help I can get.
I will make sure to post up my build project once I start it.
I own a 2006 Dodge Ram Mega Cab and looking at building a box to run four 10's.
Looking at purchasing the following subs - JL Audio 10W3v3-4
I found a website that builds boxes for my truck and I attached a picture of the box.
I'm pretty good with building stuff and this would be easy for me to do.
These are the box dimensions
Dimensions: 59 × 11.25 × 13 in
Total Volume (CuFt): 3.11
JL Audio website says the following for the sub: Minimum Sealed Box Volume: 0.625 cubic feet
Questions I have.
1) How do I calculate the Cuft I need for four of these subs? Do I just time by 4?
2) Is it best to have one big sealed box or have dividers in the box for each sub?
Thanks for any help I can get.
I will make sure to post up my build project once I start it.