Eclipse EA3532 to replace Dual XPA4640

Drummer65
10+ year member

Senior VIP Member
Right now i have a crappy dual 4 channel amp to power my vifa tweets and silver flutes. Both speakers are rated at 80rms and right now im giving them about half with the dual amp. I'm only running a front stage of two tweets and two mids but each speaker gets its own channel. I'm looking to improve the sq in the system because its a pretty cheap amp. I came across the Eclipse EA3532 on craigslist for $75. I know its an older amp but is the SQ and power better then that of the Dual. Would getting the eclipse amp be worth the $75 upgrade for my front stage?

Thanks

 
Okay well i ended up getting the Eclipse EA3532 but i have a problem. When the amp is in 5 channel mode, all 4 channels work ( two tweets, two mids) but because I am not using the subwoofer channel i would like to flick the switch to 4 channel mode to gain some output. But when i change it to 4 channel mode one of the channels cut out and only 3 out of the 4 work. My Dual amp sounded clearer at higher a volume then this amp so i would like to use the 4 channel mode to gain some power to my speakers, becuase at the momment they are distorting at high volumes.

Any help would be great, Thanks

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

About this thread

Drummer65

10+ year member
Senior VIP Member
Thread starter
Drummer65
Joined
Location
Newport Beach, CA
Start date
Participants
Who Replied
Replies
2
Views
994
Last reply date
Last reply from
Drummer65
IMG_20260516_193114554_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0
IMG_20260516_192955471_HDR.jpg

sherbanater

    May 16, 2026
  • 0
  • 0

New threads

Top