Does JL Audio make a "Platinum Series"?

i thought so. when i asked about the specks, he started to mumble and it seemed he was pulling numbers outa his @$$ and i felt like he was just trying to impress everyone that was in earshot by BSing me. so thanks a lot

 
People try to claim that TMA is on par with the JL line, and while it is decent, I dont feel it is as good having heard both

 
OK, but is their TNA mobile line better/worse/or the same as their regular line?
TMA is lower class than the slash series.. But My buddy did a swap with the TMA 1000 watt class D to the 1000/1 and audibly didnt notice much pushing 2 12 w3v3s.. The slash did seem like it had more power behind it tho, made it feel like the subs were hitting harder.. But for the price difference the TMAs are descent..

 
The slash did seem like it had more power behind it tho, made it feel like the subs were hitting harder..
That is to be expected, as the JL was doing 1000 at whatever voltage and ohm, so box rise was not a factor...The TMA would have lost power from volt droppage as well as box rise....but really, for the price, I would run TMA

 
OK, this kid claimed that they had a platinum series and he was throwing out crazy numbers that his "platinum series" 750/1 could do. i was curious cause i had/have never heard of a platinum series til now.

 
OK, this kid claimed that they had a platinum series and he was throwing out crazy numbers that his "platinum series" 750/1 could do. i was curious cause i had/have never heard of a platinum series til now.
Neither have any of us.. The kid is a spoiled punk who knows nothing about audio, and buys the most expensive mainstream **** because he thinks its the best..

Laugh, and walk away

 
OK, this kid claimed that they had a platinum series and he was throwing out crazy numbers that his "platinum series" 750/1 could do. i was curious cause i had/have never heard of a platinum series til now.
Neither have any of us.. The kid is a spoiled punk who knows nothing about audio, and buys the most expensive mainstream **** because he thinks its the best..

Laugh, and walk away

 
That is to be expected, as the JL was doing 1000 at whatever voltage and ohm, so box rise was not a factor...The TMA would have lost power from volt droppage as well as box rise....but really, for the price, I would run TMA
I thought that to, until my memphis mc1000d played the w3s the best out of everything

TMA and Memphis subs wired to 1 ohm, 1000/1 @ 4

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Ill also add that, its nice to have rear fill for passengers and for that surround sound affect, especially for an SUV or a 4 dr vehicle. If the...
38
1K
Speaker ratings are generally a thermal/mechanical limitation of the drivers. Music is dynamic, not continuous. During quiet periods a song, you...
4
325
Thanks everyone for the replies! Like I said in my first post I’m not wanting to be loud, I just would like to have a little extra bass.. I like...
12
978
It's always leaned that direction. Not sure how cheap you can really get anything done these days. Deadening and custom mounting...
10
946
You're not going to know until you test with a meter. Typically even carpeting a box as opposed to painting is going to lose a few tenths.
3
1K

About this thread

daking247365

10+ year member
Member
Thread starter
daking247365
Joined
Location
Huntersville, NC
Start date
Participants
Who Replied
Replies
17
Views
1,625
Last reply date
Last reply from
hzsogood
1000007975.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0
1000007974.jpg

Mr FaceCaser

    May 16, 2024
  • 0
  • 0

New threads

Top