do i need the big 3
- Thread starter conor_thompson
- Start date
- Replies 1
- Views 1K
-
2Participant count
-
Participant list
-
conor_thompson
Tenacious
Banned
Your amps power wire goes to your battery.. Which should have an external fuse in it near the battery
The big 3 consists of a wire from:
1. Alternator + to battery + (use factory master fuse or an external in-line fuse)
2. Battery - to chassis ground
3. Engine block or alternator case to chassis ground
The big 3 consists of a wire from:
1. Alternator + to battery + (use factory master fuse or an external in-line fuse)
2. Battery - to chassis ground
3. Engine block or alternator case to chassis ground
Activity
No one is currently typing a reply...
Similar threads
How I would approach it is install your new amplifier and start using it.
Install a voltage gauge and if you see your voltage lowering then add...
- Started by Ellessucs
- Wiring, Electrical & Installation
While most Asian and African markets will identify Honda's small hatchback as the Jazz model, most Western regions will know the same model as the...
- Started by mhdali1
- Wiring, Electrical & Installation
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
- Started by kanihoncho
- Amplifiers
Yup , the dsp should have input sections, it may have one for sub?
Hu to dsp. Dsp to amps, amps to speakers. Probably help you to draw this all...
- Started by supafly1
- General Car Audio
Thanks man! Quitting drinking and battling DRESS syndrome has given me a new outlook on life.
- Started by ikpthegame
- Enclosure Design & Construction
About this thread
New threads
-
-
-
-
Need advise for batteries & 2 amps
- Started by Ellessucs
- Replies: 4
-
