Do I need a preamp for Joying head unit?

  • 1
    Participant count
  • Participant list
I installed a Joying head unit recently on my Nissan Altima with Bose option. It works great, but I chose to wire the pre-amp outs (RCA connectors) to the OEM Bose amp that sits in the trunk. There is too much hiss and not enough amplitude, as I presume that the preamp outs don't supply enough amplitude to properly drive that amp. I tried wiring the speaker outputs to the amp inputs, but they supply too *much* amplitude. Is there an inexpensive, 12V preamp out there that will boost the preamp outs to a level that the OEM amp likes? I like the OEM amp, and it drives six speakers, so I'd rather not wire around it.

Thanks!

Steven

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

How I would approach it is install your new amplifier and start using it. Install a voltage gauge and if you see your voltage lowering then add...
4
246
Very nice to hear you found what you needed to get your audio system/ect. up to your needs. we appreciate the information provided in this thread...
4
248
The Kappa's have a high sensitivity rating of 93 db so the X802-5 would be fine. A good high sensitivity 8" sub in a properly sized box would fit...
2
534

About this thread

chrismonsteve

Junior Member
Thread starter
chrismonsteve
Joined
Location
Georgetown, Tx
Start date
Participants
Who Replied
Replies
0
Views
770
Last reply date
Last reply from
chrismonsteve
Screenshot_20240523-151806.png

1aespinoza

    May 23, 2024
  • 0
  • 0
1716436519534.png

Doxquzme

    May 22, 2024
  • 0
  • 0

New threads

Top