Do I need 1/0 or 4ga wire?

  • 3
    Participant count
  • Participant list

Pearson
10+ year member

Senior VIP Member
430
0
Florida
I'm tryng to put the wiring together for my system. I will have a sa-8 ran off a hifonics hifi1000.1d and massive audio vk6 running off of an old ken wood amp that's only pushing out 125rms per channel. I know for the big 3 i'm gonna use 1/0 so i'm trying to figure out if it'd be better to run 4ga for the power and grounds or 1/0. I don't think i'm using enough power to warrant the 1/0 but idk and I doubt i'll upgrade due to the fact that I still need my back seats so I can't go any bigger than an 8" and with the sundown, i'm pretty much pushing the best I can so there isn't too much better I can get. The comp amp i'm not too worried about upgrading cause the stocks are decent already and my last system they worked fine without amping them so i'm even going above that. Will CCA wire be alright or do I need OFC? I've tried reading up on the differences but again, I don't think i'm pushing enough to actually see a big difference. Last bit of question; Is there really a difference between distro blocks? (ex. knu, stinger, kicker, rf)

Here's the options

- Run 1/0 from battery to distro block/ 4ga to both amps

- Use 1/0 from ground to distro block/ 4ga to both amps again

---------or---------

- Run 4ga from battery to distro block/ 4ga to both amps

- Use 4ga from ground to distro block/ 4ga to both amps again

I know that was a lot for one post and I apologize. I don't like making more than one post concerning different things so i just make one long one. lol Thanks for any input and help.

 
thats about the amperage i pull, i use 4g with 0 issues, but i also have a 136amp alt.

4g is rated for up to 150amps

Also, that post isnt very long lol

 
Just checked and my frontier has an 80amp alt so that's not that great. Hopefully the big 3 will help a little.

The only thing holding me back from 1/0 is the price.

Good to know about the CCA vs. OFC cause there's a crazy price difference and I already have some CCA layin around. I didn't think that there would be a difference in distro blocks but I wanted to ask before I went for the cheaper one and found out later that there's a big difference.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

Just remembered, I have that same coaxial/comp set, BNIB, $245 shipped if you are interested. I have the matching coaxials, took these of the...
12
279
Using Sky High copper OFC wiring and Stinger 8000 series rcas. The US Acoustics usx4085 is rated at 85X4 @ 12.9 volts and proably close to 100w X...
6
233
That is the great thing about Maestro products, they are very thorough. Downside is the price tag.
3
424
Lifelong Pioneer Premier series user here. Switched to the Kenwood eXcelon Reference (XR) DDX9905S and never looked back. Excellent sounding...
9
768

About this thread

Pearson

10+ year member
Senior VIP Member
Thread starter
Pearson
Joined
Location
Florida
Start date
Participants
Who Replied
Replies
3
Views
722
Last reply date
Last reply from
Pearson
IMG_0005 (5) - Copy - Copy.JPG

Dan Medina

    Jun 17, 2024
  • 0
  • 0
Screenshot 2024-05-31 182935.png

Doxquzme

    Jun 15, 2024
  • 0
  • 0

New threads

Top