Directed 2400 amp and 3 subs help please

[xrs bryan 10+ year member]

I have a directed 2400 watt amp and 3 kicker solo baric 12s is this enough amp for all these subs?

also what is the best way to wire these three subs to the amp?

and one last question where should i start for amp settings?

heres the amp

http://www.autosafewarranty.com/detail.aspx?ID=29

heres the subs

http://www.kicker.com/solo-baric_L5

4 ohm

thanks in advance for the help....

Click to read more...

 

[91Chevy 10+ year member]

Best you can do is 2.67 Ohms. With that amp doing 1200W @ 1-Ohm, I can't imagine that amp putting out enough power for more than 1 sub at it's maximum RMS handling.

 

[spl_robb 10+ year member]

you could do parallel on all coils and then parallel all to get .66 ohms that with imp raise on your box you could get 1+ ohm reading for the amp

L5's are not that power hungry so youldo fine,just save for a bigger amp.

i had one of those amps and it pounds, runned 2 hx2 15 on a 6cuft box and did a 144.8 on a single batt //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[xrs bryan 10+ year member]

...................