Are these 2 ohm or 4 ohm subs? The specs on the Dayton and Parts Express websites are confusing. The title page on both sites says 4 ohms but the spec sheet on both sites says 2 ohm impedance. I'm getting ready to put a pair of 10"s in a supercrewsound enclosure for my 08 Infiniti G37 Coupe. The enclosure has two 0.5 cu ft chambers. I'll be using an Alpine MRX-M100 mono amp with 600 rms at 4 ohms and 1000 rms at 2 ohms. I'm hoping this will be a workable setup.
Thanks, Sam
Thanks, Sam