Dayton 12" HO SVC X2 Build

  • 7
    Participant count
  • Participants list

deez283
10+ year member

Senior VIP Member
These will be going in a 2002 GMC Envoy.. Box is 3.0 cuft. Tuned to 30hz with a 12.5" x 3.5" port opening.

Subs will be powered with a Zapco ST-2000XM II or JL RD1500/1 both provide 1500 rms @ 2 ohms.

Progress so far.
 

Attachments

  • DSC06738.JPG
    DSC06738.JPG
    664 KB · Views: 26
  • DSC06739.JPG
    DSC06739.JPG
    669.2 KB · Views: 27
  • DSC06736.JPG
    DSC06736.JPG
    778 KB · Views: 23
  • DSC06737.JPG
    DSC06737.JPG
    640.6 KB · Views: 26
  • DSC06740.JPG
    DSC06740.JPG
    1.3 MB · Views: 23
Hit a Screw with the router bit when I was doing my cutouts for the subs, had to finish with my $hitty jig saw.. cutouts didn't turn out the best but will grab a new bit for the 2nd baffle.
 

Attachments

  • DSC06741.JPG
    DSC06741.JPG
    685.5 KB · Views: 22
  • DSC06743.JPG
    DSC06743.JPG
    1 MB · Views: 21
  • DSC06745.JPG
    DSC06745.JPG
    753.6 KB · Views: 22
These will be going in a 2002 GMC Envoy.. Box is 3.0 cuft. Tuned to 30hz with a 12.5" x 3.5" port opening.

Subs will be powered with a Zapco ST-2000XM II or JL RD1500/1 both provide 1500 rms @ 2 ohms.

Progress so far.
Nice! Love the sound of these subs. Clean bass, quick response is how I would describe!
 
Nice! Love the sound of these subs. Clean bass, quick response is how I would describe!

I've ran the 10's in PE's recommended enclosure size and they did pretty good, This time I got more room to work with and it will be a SUV instead of a truck so that alone should help.

Made a little more progress..
DSC06746.JPG
DSC06747.JPG
DSC06748.JPG
DSC06749.JPG
 
I ran the 10’s as well in a single cab.

I still got the 10's in my truck, I don't know if it's cause I upped my power and got a new agm or they broke in, Maybe a combination of both but they are sounding pretty nice now.

I've thought about trying a sealed 15" in my truck but I don't know if I could squeeze the box between my buckets, I got some RSS390HE-22's that call for something like 1.3 cuft.
 
I still got the 10's in my truck, I don't know if it's cause I upped my power and got a new agm or they broke in, Maybe a combination of both but they are sounding pretty nice now.

I've thought about trying a sealed 15" in my truck but I don't know if I could squeeze the box between my buckets, I got some RSS390HE-22's that call for something like 1.3 cuft.
What truck?
 
That's coming along nicely. I just found most of a sheet of MDF while doing some organizing in my garage, once the weather cools some I'm going to build something just for the sake of building something.
 
That's coming along nicely. I just found most of a sheet of MDF while doing some organizing in my garage, once the weather cools some I'm going to build something just for the sake of building something.
Same here. I may have half sheet in hand and just in the mood to cut some wood 😁.
A sheet is currently $60 here😩
 
That's coming along nicely. I just found most of a sheet of MDF while doing some organizing in my garage, once the weather cools some I'm going to build something just for the sake of building something.

Thank you, That's how I got going on this box found half a sheet of some nice birch 13 ply and the rest is some 7 ply birch from a shelf I took apart lol.
 
Activity
No one is currently typing a reply...

Similar threads

The 8's have a frequency response of 40hz and up. So I would cross them over at 60hz and up. And crossover my subs at 80hz. That way I would get a...
6
1K
Tuning as low as PE suggests will problematic (long port) unless you go with a passive radiator.
4
1K
Pay attention to the width to height ratio of the port. The further you deviate from a square shape, the less efficient the port becomes and it...
7
1K
Some people make to big of a deal about high voltage rcas. I had a pioneer head unit with smart sync ( 31 band eq, crossovers TA etc ). I replaced...
4
1K
Ive been looking at amarican bass xd 1222 or 1244 ,and sundowns e series, they both seem very good , can't verify sound quality tho but I know...
37
9K

About this thread

deez283

10+ year member
Senior VIP Member
Thread starter
deez283
Joined
Location
Aberdeen, WA
Start date
Participants
Who Replied
Replies
22
Views
2,101
Last reply date
Last reply from
deez283
Screenshot 2024-03-07 184329.png

Doxquzme

    Mar 27, 2024
  • 0
  • 0
IMG_3075.jpeg

Daniel Lee

    Mar 27, 2024
  • 0
  • 0

Latest topics

Top