Custom PSI 10" video

[Cameron_B 10+ year member]

Have it in a 40hz box so it is subsonic'ed very high cutting off the lows. Need to build a daily box at around 30-32hz cause I can tell this thing will dig down lowww.

HPF is around ~70

Gain is set for around 1500wrms on aq2200

http://s133.photobucket.com/albums/q51/Tums71/?action=view&current=MVI_2101.flv

Click to read more...

 

[Cameron_B 10+ year member]

Also, the sub was just recived today so it is not fully broken in. By "ear meter" it is doing low 40s at ~40 outlaw.

I hope to get 145 on a 52hz burp (RF of truck) outlaw

Box is 1.5 gross at 40hz with 1.5"x10" port (15 sq in.)

 

[Beaver1992 10+ year member]

nice for one ten i guess. jk cam nice dont blow it up this time ok

 

[Cameron_B 10+ year member]

nice for one ten i guess. jk cam nice dont blow it up this time ok

Don't think I could if I wanted to.

 

[Beaver1992 10+ year member]

thats what you said last time and tada off goes the cone

 

[KHARPS 10+ year member]

Looks good. Too bad you aren't closer, I have about 3 boxes I haven't tossed yet that you could mess around with.

 

[Cameron_B 10+ year member]

How much for shipping to 28150 plus packaging costs for a lower tuned one? PM me if interested man...thanks!

 

[KHARPS 10+ year member]

How much for shipping to 28150 plus packaging costs for a lower tuned one? PM me if interested man...thanks!

I have one that is real big and probably wouldn't be too comfortable for a daily setup, it has the (2) 3'' aeros firing up but I could only get it tuned to like 36hz because you need 3'' from the port to the bottom of the box. And I think the holes for the ports were a little too big. The other one is the single 4'' aero firing towards passenger side but 40hz was the lowest I could tune it to or else the port would be too close to the sub. But if you wanted to run a longer port and have some of it out of the box a little then it would be perfect.

 

[DonH 5,000+ posts]

i like my extended cab //content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

nice sub mang!

 

[grimreper912003 5,000+ posts]

Hold still when taking vids. lol. You shake alot, I could barely see the sub move.

 

[BushJ311 5,000+ posts]

More specs on the sub?

What motor is that

 

[Cameron_B 10+ year member]

Hold still when taking vids. lol. You shake alot, I could barely see the sub move.

LOL thanks....ill admit im no master at taking vids, but I was propped up against the truck. Might explain the shaking //content.invisioncic.com/y282845/emoticons/crazy.gif.c13912c32de98515d3142759a824dae7.gif

More specs on the sub?What motor is that

10" with I think triple spiders

1500rms

9.25" double stack with short top plate (gives me a 5.25" depth)

RE MT dustcap

I also think it has a flatwind on it but didnt really give it the one over before I threw it in the box.

 

[Cameron_B 10+ year member]

I have one that is real big and probably wouldn't be too comfortable for a daily setup, it has the (2) 3'' aeros firing up but I could only get it tuned to like 36hz because you need 3'' from the port to the bottom of the box. And I think the holes for the ports were a little too big. The other one is the single 4'' aero firing towards passenger side but 40hz was the lowest I could tune it to or else the port would be too close to the sub. But if you wanted to run a longer port and have some of it out of the box a little then it would be perfect.

Ok, thanks, shipping would probably kill me on the boxes...and im sure you probably dont wanna ship.

I wish I was closer. I would like to try that dual 3" box.