Current Punch 60IX

[Jim Trucks]

What is current draw for Punch 60IX with trigger on and no signal input?...Thanks, Jim

Click to read more...

 

[1aespinoza 10+ year member]

What is current draw for Punch 60IX with trigger on and no signal input?...Thanks, Jim

The manual states nothing about idle current. Or it is somewhere in one of the paragraphs.

 

[Doxquzme Premium Member]

I think around 1.8 - 2.2 amps so Negligible, why?

 

[Jim Trucks]

The manual states nothing about idle current. Or it is somewhere in one of the paragraphs.

Thanks for the quick response. Jim

I think around 1.8 - 2.2 amps so Negligible, why?

It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.

 

[1aespinoza 10+ year member]

Thanks for the quick response. Jim

It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.

4 amps is high. Not an issue if you normally do not listen for hours while puttering around.

 

[Doxquzme Premium Member]

Thanks for the quick response. Jim

It is drawing about 4 amps at idle. Doesn't seem to over heat though. Thought that was a bit much.

Class A/B, right? If I recall, these little 2x30 watt jems could best several hundred watts, mono. One of RF's endearing qualities on most of their equipment, you always knew you were getting more than you paid for.