curious what do u guys think about this trade

[des343 10+ year member]

I traded mt two Rockford all black t1s for 3and audiobahn alumx 12s with grills and im not sure the amp is either a a1300hct or 1500hct the top says 1300ago but the sticker with the model number on the bottom say 1500 so im confused.

I hooked the bahns up to my t2000 amp not even sure what ohm load honestly either 1 or. 5 ohms my cars electrical can't keep up the cap don't help of course lol. But these subs get lower and harder together than my t1s and that's probably without them pushed to their potential they don't hardly even get warm while thumping away im pretty impressed and the amp seems neat but don't know much about it..

Also what kind of the box would be suggested for these 3downloads subs to get the most out of them they r in a long box each has about .5 to 1 cube of single chanmbee space (sealed) stuff and loaded with a lot of the padding stuff

Click to read more...

 

[des343 10+ year member]

?? Anyone

 

[stylez12321 10+ year member]

3 of the audiobahns on ebay run about $230 shipped. the T1's hold a value of around $250. Build wise rockford is better. But you got 3 subs so more cone area is gonna create more bass.

 

[Violence. 10+ year member]

be careful with the aluminum cone audiobahns. the surround seperates from the cone if you beat on them. they dont like to stick. seen many of them come apart at the cone edge.

 

[des343 10+ year member]

I've seen a lot of l8er do that too but they seem to pound away pretty good im surprised for cheap subs they would b good value. They sound as loud as my two t1s and get lower with there being 3with of em.

The rockfords were very unimpressive seeing as how 3 of these are cheaper than one t1 ...and would b louder and musically they sound better

 

[Ronny 10+ year member]

Just do 1 cubic foot per woofer with only 1lb of polyfil in each chamber and you will be set.

You are running 2kW on the stock electrical system? Add another good AGM battery in the rear and an HO alt down the road if you plan to keep going bigger.

 

[destined2race 10+ year member]

you should always be sure what ohm load ur running when hooking new stuff up. but ya if you got lucky and the ones you got hold up and dont fall apart, there not too bad.

 

[des343 10+ year member]

Thanks ya I was thinking of a larger ported box for them I think they have about 1the cube right now each chamber not sure how much polyfill pr whatever and they seem to be holding up well not getting real warm it anything just thumping away