I have a 2 way crossover that only has one set of rca for subs and one for the speakers in my car. Well here is the deal I have to make this work for 2, 2channel amps for my speakers in my car (this has nothing to do with wireing for a sub amp or any sub stuff at all). If I made each amp a Right channel amp and a left channel amp. Then I ran one rca of the pair to each one and then used a Y adapter to hook it to the amp and then set the amps to mono. Would that solve my problem? because I really dont want to loose signal strength because of my new shiny crossover. Thanks for any help you can give me.
-
1Participant count
-
Participant list
Activity
No one is currently typing a reply...
Similar threads
12db is usually 180° out of phase if used left and right. 24db makes the full 360° phase change when running left and right.
This is...
- Started by Taxed1
- General Car Audio
Nice amp though. ;)
- Started by Q-Dub23
- Wiring, Electrical & Installation
On another note, if you're competing in SPL, you might want to check around at what the best crossover point is. These two drivers (your 6.5s and...
- Started by Bass so loud it HZ
- General Car Audio
I usually cross at 80hz
And as a drummer
The meaty end of a kick is 40hz..like bands such as Metallica
50hz is a U2 kick
- Started by shortyg83
- General Car Audio
About this thread
