Crossfire Amp Low Output

[Tom Da Tech 10+ year member]

Ok guys here is my problem.

I have a Crossfire 360.1 and I am having a little bit of problems with it. It powers up just fine and never goes into protect after boot up, but when I install all the output speaker wires I get little to no sound at the speaker end. I am not sure what would be the problem please give me a little guidence and possibly a way to fix it or check it out to narrow the problem down. thanks a lot.

Click to read more...

 

[disturbed471985 5,000+ posts]

how did u set gains? wired speakers correctly?

 

[Tom Da Tech 10+ year member]

Yes all wires are correct and I even double checked I pluged in anothe amp and it runs just fine so I know its notthe RCA's ANd as for setting the gains I cannot set the gain if there is Low output . Its like the amp is whispering

 

[Timmothy Web 10+ year member]

have a picture of the board?

 

[Tom Da Tech 10+ year member]

Trying but the camera I have is pretty bad and the picture comes out real dark on the inside of the amp . what can I do to get a better picture ?

 

[jeepintn 10+ year member]

Turn more lights on lol... Or take it outside if it's sunny

 

[audiobaun 5,000+ posts]

Trying but the camera I have is pretty bad and the picture comes out real dark on the inside of the amp . what can I do to get a better picture ?

//content.invisioncic.com/y282845/emoticons/crap.gif.7f4dd41e3e9b23fbd170a1ee6f65cecc.gif

 

[Tom Da Tech 10+ year member]

Got a camera and will be posting up some pictures of the guts to the amp. Sorry for the delay.

 

[audiobaun 5,000+ posts]

//content.invisioncic.com/y282845/emoticons/popcorn.gif.32dd9e22fd77e77bc3c907062768fcd2.gif