component amp suggestions?

[rtillaree 10+ year member]

i had posted this a few days ago, but i will try again with a more refined base...

i will have a set of Boston z6's up front in the next few days (currently have sl-80's) and currently have a set of Boston pro50's in the rear, the z's are 400 and the 50's are 200 both are 3 ohm if not mistaken, my current amp is faulty, its a 600.4, worked pretty decent, im basically wanting to run 200 to both sets, i will use this on a mostly daily basis and i want crisp clean power, under 1k would be great and under $850 would be preferred...

thanks

Click to read more...

 

[rtillaree 10+ year member]

//content.invisioncic.com/y282845/emoticons/confused.gif.e820e0216602db4765798ac39d28caa9.gif

 

[rtillaree 10+ year member]

*cough*

 

[gr1m 10+ year member]

Arc Audio 2500XXK or Zapco C2K-2.5X or Zapco REF1000.4 all

 

[FoxPro5 5,000+ posts]

Dls A3

 

[Beat_Dominator 5,000+ posts]

You want a 4 channel that'll do 200x4 ??? Am I right?

 

[rtillaree 10+ year member]

im going to checkout the above mentioned real quick...

You want a 4 channel that'll do 200x4 ??? Am I right?

basically, or up to 250 max x 4 at 3 or 4 ohms...i just wnated some suggestions on something crisp, clean and reliable...i was getting close to grabbing a PG Xenon 200.4, ive looked at the rf t8004 and the t15004, but im not sure if the 800 would be enough and i think the 1500 might be too much...

 

[bri487 5,000+ posts]

zapco 1000.4 reference DC