ekk
Junior Member
I want to ditch the passive crossovers in my front components, and run the woofer and tweeter actively.
When I emailed the speaker manufacturer, they sent me the the following info.
The 6.5" midbass can work up to 5 to 6kHz with no problem.
The 25mm tweeter has a lowest crossover point of 3.200 Hz with at least 12 dB/Octave slope.
Any suggestions on what to use as my crossover points and slopes? Thanks
When I emailed the speaker manufacturer, they sent me the the following info.
The 6.5" midbass can work up to 5 to 6kHz with no problem.
The 25mm tweeter has a lowest crossover point of 3.200 Hz with at least 12 dB/Octave slope.
Any suggestions on what to use as my crossover points and slopes? Thanks
