Chasis Ground

[SLIPKANOT 10+ year member]

Whats the best way to do a chasis ground. i have the paint ground off and down to steel. I rana bolt through it with my ground wire attatched. is there a better way.

Click to read more...

 

[AnthonyO 10+ year member]

As long as its bare metal you should be good. I usually grind mine down to bare metal, drill out a hole, use a bolt with my ring terminal and wire attached, inserted into the hole and a lock nut on the backside. Once done and I see that I am getting a solid ground, I use undercoating and spray over it to prevent rusting.

 

[maylar 10+ year member]

Only thing beyond this ^^^ is to use an internal tooth lock washer between the body and your terminal. The little jagged points on the washer will bite into both surfaces for best contact.

 

[SLIPKANOT 10+ year member]

Sweet, Thanks!!!

 

[knightsdaze 10+ year member]

It's a good idea to put some dialectric grease on it as well.. on the inside that is.