Changing up my system. Need some opinions

  • 1
    Participant count
  • Participant list

Boomstang99

Junior Member
27
0
Ohio
My current system is 2 infinity 1260w svc subs, a hifonics 1000w gladiator amp, and a dual ported box. The vehicle is a mustang so small trunk.

The box dimisions are w-36in d-16in h-13in about 1.66cuft per chamber if i caculated correctly. The recommended cuft for them is 2.0 each. I believe im running at 2ohms which would be 750w rsm. but i think it might be wired wrong.

The system is loud i barely turn it up unless im wanting to draw attenion. but it doesnt pack that punch or feel of the bass. i mean i can feel it some but it doesnt take my breath away or anything its just loud. Im over the loud showing off phase i want more of a hurricane in the car type system. Just was wonder if i switched to a proper sized sealed enclosure would i get the more feeling bass? could i achieve that with my equipment now? if not my trunk is really small so i was also considering going 1 12 or 2 10's

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

This could be due to a voltage drop. There's no constant voltage going into the head units. It's always changing. At which point this could be...
8
2K
Simply put its an oldschool simple way of keeping the midbass in phase with each other when they are firing at each other in the front...
3
756
I am about to buy the Pioneer DMH-WT76NEX head unit. It has one USB Type C output. My Honda has an HDMI port, 2 USB-A ports, and one charger...
0
883
Haters are going to hate. It usually goes back to something personal. He would probably take it in his dirty penny to have a full Sundown sub and...
24
5K

About this thread

Boomstang99

Junior Member
Thread starter
Boomstang99
Joined
Location
Ohio
Start date
Participants
Who Replied
Replies
0
Views
584
Last reply date
Last reply from
Boomstang99
Image 5-2-24 at 8.16 PM (1).jpeg

slater

    May 2, 2024
  • 0
  • 0
Image 5-2-24 at 8.16 PM.jpeg

slater

    May 2, 2024
  • 0
  • 0

Latest topics

Top