Can someone help me w/ a design for a box?

[fast4door 10+ year member]

Well the reason for the 2" port is because of the velocity of the air coming threw the port, the port would also have to be longer making you have to wrap it around the box. I have tested 2 boxes designed by WinISD and the port noise that the boxes produce is unbarable, I have purchased BassBox Pro and the 4 boxes Ive made using its designs have been so much more accurate then WinISD. About the frequency range, I am assuming he listens to a mix of music ie rock, rap, dance etc... he said he wanted it to be tuned fairly low, so I took in to consideration that most rap songs hit the low notes (ie- get low/liljon= 17 hz). This frequency will keep his subs for over excurshing down to about 15 hz and up to about 96hz. It will be a good daily driver mixed with a little spl... and hey they were free correct, i didnt charge him for me helping out!!

 

[LoneRanger 10+ year member]

FOR FUTURE REFERENCE!

I don't really appreciate you guys copping my templates without asking.....I know you changed it around a little and hell....you might have even drawn it yourself, however it looks VERY similar to the ones i made.

In the future if you'd like to use my templates please ask. I won't charge you. Hell.....I'll even give you a nice clean one to work with. Just be curteous and ask before you use them.

 

[fast4door 10+ year member]

I feel where your coming from but there arnt that many programs that you can use to make these types of drawings, so everyone goes with the one they know MS paint!!! It's all good i will start posting pics of Termcad3ds layouts when i figure the program out.