Can anyone design me a box?

[dman4486 5,000+ posts]

well maybe if the op gets lucky

that's why I inserted the "may" in the second line

 

[dman4486 5,000+ posts]

and to the op, if you listen to much deep bass, you may look into tuning lower than 35

 

[iDesignBoxes 10+ year member]

Which is why I recommended around 28-32... and BTW, the RE box designer is VERY inaccurate...

 

[bonesninja 5,000+ posts]

and to the op, if you listen to much deep bass, you may look into tuning lower than 35

maybe he should went with 2 12"s instaed. The 8"s have an Fs of like 44

 

[dman4486 5,000+ posts]

with a Fs of 44, its gonna be pretty hard to get low deep bass out of these 8"s

ah...didn't see what the drivers were

 

[bonesninja 5,000+ posts]

ah...didn't see what the drivers were

gotcha....by all means, i'm not a super box builder either but i thought i'd help him out a bit

 

[dman4486 5,000+ posts]

ill do a little plugging and see what i come up with

 

[MyFartsStink 10+ year member]

Which is why I recommended around 28-32... and BTW, the RE box designer is VERY inaccurate...

So you say huh? So what is inaccurate about it? What kind of calculator do you use? If you dont use one, what type of equations do you use? I have always wondered how to design a box without a box calc. Last time I did it without a calc, the port was tuned to 32, but it was way too small.

 

[dman4486 5,000+ posts]

it was way too small.

hear that all the time don't ya

 

[MyFartsStink 10+ year member]

hear that all the time don't ya

only from your mom, but that was because she likes it HUGE //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:

srsly lets get back on topic

 

[dman4486 5,000+ posts]

only from your mom, but that was because she likes it HUGE //content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:
srsly lets get back on topic

//content.invisioncic.com/y282845/emoticons/laugh.gif.48439b2acf2cfca21620f01e7f77d1e4.gif:laugh:

 

[dman4486 5,000+ posts]

The best alignment i can come up with to get deep bass from those is more than 2cuft per driver, tuned around 30....overall the best looking curve for those is 1.2@35, which is what is recommended by kicker

 

[Eugenics 5,000+ posts]

have conner do it.

 

[bonesninja 5,000+ posts]

The best alignment i can come up with to get deep bass from those is more than 2cuft per driver, tuned around 30....overall the best looking curve for those is 1.2@35, which is what is recommended by kicker

so my 1.0 at 35 wasn't exactly off.//content.invisioncic.com/y282845/emoticons/biggrin.gif.d71a5d36fcbab170f2364c9f2e3946cb.gif

35 htz doesn't sound that bad....you're not gonna hit the low lows but for those 8"s its fine