Can 3 Tens get Low?

[Imtjnotu 5,000+ posts]

preferably the id max's

gonna do 3 tuned to 26 off a DDm3 wired at .67

what do u guys think about box size?

and will it get low

Click to read more...

 

[madcad95 10+ year member]

It should

 

[T.I.K. 10+ year member]

Meh

 

[Bettr n' Revrse 5,000+ posts]

preferably the id max's

gonna do 3 tuned to 26 off a DDm3 wired at .67

what do u guys think about box size?

and will it get low

Why tune so low? Gotta be careful not to over power Idmaxes as well since they are already pushing the limits for a 2" coil...

 

[HillBillyJoe]

I would do 28-30, lose some output at 26

 

[wenn_du_weinst 10+ year member]

 

[Kangaroux 5,000+ posts]

I would do 28-30, lose some output at 26

This. Tuning below 28-30 in a car is a total waste. Because of my port loading off into the hatch and cabin gain my tuning dropped from 32 to 27.

 

[HillBillyJoe]

You should be happy with a solid 30

 

[subzero 5,000+ posts]

3 tens would get hella low in a properly tuned low end monster box.

Your peak spl would suffer a little I think. I had a box tuned to 26.5 and spl was 138. @ 35? iifc

 

[wenn_du_weinst 10+ year member]

design the enclosure around your cabin gain, don't pick a random number out of thin air.

 

[Kangaroux 5,000+ posts]

design the enclosure around your cabin gain, don't pick a random number out of thin air.

Also this. Consider using aero ports so you can play around with the lengths until you are happy. Sonotubes from lowes or HD work great.

 

[wenn_du_weinst 10+ year member]

they are also cheap and you can trim them with a box cutter if you need to.

 

[subzero 5,000+ posts]

he can always attempt to change his cabin gain... resonance freq... sub position...

 

[J31Rob 5,000+ posts]

My 4 10s get down. I could play 10hz full tilt if I wanted.. I have played 20hz. Box dependant.

 

[Why So Cereal? 5,000+ posts]

My 4 10s get down. I could play 10hz full tilt if I wanted.. I have played 20hz. Box dependant.

This.

Except I have 2 10s.