camaro sub box help?

wow i hope i dont have this same problem as my setup is gonna be 2 12" type r's (not sure if their 2 or 4 ohm) and a 1200 watt jbl amp. im gonna run a box thats angled towards the front of the car and its got about 1 cu ft per slot.

and ive never seen a ported box in a camaro personally.

 
i have a 1989 trans am, with 6 ground zero nukes, and 12 nexus amps. they can get real loud. i had a 166.8 on the old audio control

pics or //content.invisioncic.com/y282845/emoticons/ban.gif.ce8465566702ef9f72e97e794ed1c86a.gif

 
wow i hope i dont have this same problem as my setup is gonna be 2 12" type r's (not sure if their 2 or 4 ohm) and a 1200 watt jbl amp. im gonna run a box thats angled towards the front of the car and its got about 1 cu ft per slot.
and ive never seen a ported box in a camaro personally.
you wont camaros hold bass very well i just so happen to have to big of a box for 2 10s

 
you wont camaros hold bass very well i just so happen to have to big of a box for 2 10s
yeah i had 2 12s in my first camaro with alot less power than im gonna be running now but for some **** reason i cant find a box like i used to have. hopefully this q-logic box im buying from a member on here does the trick.

 
Figure out how many cubes you have in there first. If its to big fill in some of the area to reduce the volume. Some spray foam would work, not sure if you could get any pieces of MDF and block off some of the area or not. You probably only have the hole for the sub to work thru. I have some rigid closed cell foam blocks that I have used to reduce volume in an oversized box. Worked great.

 
Activity
No one is currently typing a reply...
Old Thread: Please note, there have been no replies in this thread for over 3 years!
Content in this thread may no longer be relevant.
Perhaps it would be better to start a new thread instead.

Similar threads

After the noise treatments in the doors, floor, and rear of the Camaro, I turned my attention to the firewall. These vehicles have a tube that...
40
6K
Getting a good voltage reading does not mean good power transfer. You could read 13.8v out of a 24 AWG wire. Recheck your amplifier's ground and...
2
245
That would be a function of the harness, not the HU, I think. Have you looked into a Maestro or iData interface? i would check with crutchfield...
12
563

About this thread

dspencer24

10+ year member
Senior VIP Member
Thread starter
dspencer24
Joined
Location
where the military sends me
Start date
Participants
Who Replied
Replies
19
Views
1,845
Last reply date
Last reply from
fshanda
received_1404248310277849.jpeg

Blackout67

    Jun 10, 2024
  • 0
  • 0
445981256_3731324230470906_9081536917273579948_n.jpg

Decebal

    Jun 10, 2024
  • 0
  • 0

New threads

Top