Hey guys
I'm building a new box for my two JL 15w3s. Previous box was just about 10 cubes after driver and port displacement and tuned to ~33hz. I want something considerably smaller this time around.
I was thinking 7 cubic feet of internal volume after driver and port displacement. Think it could happen?
My MAX box dimensions (could probably fit bigger, but I cut off a bit on each to ensure it will fit):
(3/4" MDF wood)
HEIGHT: 22 inches
WIDTH: 37 inches
DEPTH: 21 inches
Single Driver Displacement: .14cf (two drivers)
The box will be a shared chamber, slot ported box. I would like to try and maintain SQ, so I would assume something tuned low would be best... I'm considering all opinions though!
Any box builders out there that would like to help me out here, it would be greatly appreciated! If I'm missing anything, please let me know.
Thanks for reading,
Michael
I'm building a new box for my two JL 15w3s. Previous box was just about 10 cubes after driver and port displacement and tuned to ~33hz. I want something considerably smaller this time around.
I was thinking 7 cubic feet of internal volume after driver and port displacement. Think it could happen?
My MAX box dimensions (could probably fit bigger, but I cut off a bit on each to ensure it will fit):
(3/4" MDF wood)
HEIGHT: 22 inches
WIDTH: 37 inches
DEPTH: 21 inches
Single Driver Displacement: .14cf (two drivers)
The box will be a shared chamber, slot ported box. I would like to try and maintain SQ, so I would assume something tuned low would be best... I'm considering all opinions though!
Any box builders out there that would like to help me out here, it would be greatly appreciated! If I'm missing anything, please let me know.
Thanks for reading,
Michael
