Box size

[codykeon99 10+ year member]

A freind gave me a pair of old school Fusion Powerplant subs. The model number is fpw-1000. ive searched everywhere I know of on the web for a manual on these subs with no luck!!//content.invisioncic.com/y282845/emoticons/pissed.gif.9f665f96bc89e98e708dabd4580bb591.gif Does anyone know what size enclosure these are supposed to be in?? I really appreciate the help!!

Thanks a bunch in advance!

Click to read more...

 

[winkychevelle 10+ year member]

what type of box sealed id go .65-.9cubes ported 1.5-1.8cubes tuned to your liking for general listening spl ported a smaller box with more port will give u a higher peak

 

[TitoThePirate 10+ year member]

ive always wanted to try a fusion sub.

 

[winkychevelle 10+ year member]

these were 350rms, 2inch voice coils, dual 4, and normally they do pretty good in prefabs but they come alive when tuned low

 

[codykeon99 10+ year member]

these were 350rms, 2inch voice coils, dual 4, and normally they do pretty good in prefabs but they come alive when tuned low

Thanks for thisinfo! Im going to start a box this weekend I think. What do you recommend to tune to? Low 30's?? I listen to rock and Ill have a memphis 16-st1000d pushing the subs. Thanks again for the info!!

 

[winkychevelle 10+ year member]

i would tune to 34 myself

 

[codykeon99 10+ year member]

i would tune to 34 myself

Ok I have never built a ported box before, Im also having a hard time finding a site that has slot ported plans. Can you point me in the right direction on some useful info? Thanks again! I appreciate all your help! I assume I 1st get plans for a box thats the correct cubes im looking for and then find plans for a port @ 34hz? Sorry if these questions are asked all the time but this is my 1st ported enclsure.//content.invisioncic.com/y282845/emoticons/uhoh.gif.c07307dd22ee7e63e22fc8e9c614d1fd.gif

 

[winkychevelle 10+ year member]

ImageShack® - Online Photo and Video Hosting

this is three cubes tuned to 33 which is a good start

 

[codykeon99 10+ year member]

ImageShack® - Online Photo and Video Hosting
this is three cubes tuned to 33 which is a good start

Thats perfect! Thats almost the exact dimensions I have to work with in my vehicle. Thanks once again! Ill post some pics when I start my build

 

[winkychevelle 10+ year member]

cool man glad to help

 

[codykeon99 10+ year member]

Do you happen to have any plans for 3 cubes tuned around 33hz with a max width of 40.5" and 16" max hieght but a WEDGE type? Id like the bottom to be 7 1/2" bigger than the the top to utilize as much space as possible. (itll fit tight against my rear seat) I know its a shot in the dark for you to have box plans for these dimensions but RE's calculator only puts the subs on the side thats not 90 degrees and id like them on the side that is. Do you happen to know of a diff. program? Thanks

 

[winkychevelle 10+ year member]

Do you happen to have any plans for 3 cubes tuned around 33hz with a max width of 40.5" and 16" max hieght but a WEDGE type? Id like the bottom to be 7 1/2" bigger than the the top to utilize as much space as possible. (itll fit tight against my rear seat) I know its a shot in the dark for you to have box plans for these dimensions but RE's calculator only puts the subs on the side thats not 90 degrees and id like them on the side that is. Do you happen to know of a diff. program? Thanks

i personally dont hit up ramdesigns, moblenclosures, or buck on here and they will custom design u a box for a few bucks they will even send you full cut sheets and depending on the designer a 3d rendering

 

[codykeon99 10+ year member]

i personally dont hit up ramdesigns, moblenclosures, or buck on here and they will custom design u a box for a few bucks they will even send you full cut sheets and depending on the designer a 3d rendering

Awsome thats what I was looking for! Thanks once again man! lol

 

[winkychevelle 10+ year member]

Awsome thats what I was looking for! Thanks once again man! lol

wow just read over my typo i WOULD look into those guys i didnt mean to say dont look into them

 

[codykeon99 10+ year member]

I knew what you meant from the rest of your post. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif