box set up for 2 soundsplinter 12's

[Johnston_2007 10+ year member]

i used a online box calculater to figure this up. u guys tell me if its right or not. also im after spl with these bad boys.

Net Volume: 4 cubic feet

Tuning Frequency: 34 Hz

Port Width: 5.75 inches

Port Area: 60.375 Square Inches

Port Length: 28.75 inches

External Dimensions: 27.5 wide x 12 tall x 36.25 deep.

Board Dimensions and Quantity

Color : Count : Width : Height

Top and Bottom: 2 :27.5 inches :36.25 inches

Red: 1 :21 inches :10.5 inches

Yellow: 1 :35.5 inches :10.5 inches

Black: 1 :26 inches :10.5 inches

Green: 1 :36.25 inches :10.5 inches

Teal: 1 :25.25 inches : 10.5 inches

Number of 49x97 Sheets of 3/4" MDF: 0.75

the subs will be facing toward the top of the truck and the port will be facing toward the end of the truck or the rear of the car. also there is a picture but it wont show up maybe if i can get it to i will post it sorry about this thanxs guys

well i just went to paint and made it what it looks like

Click to read more...

 

[denim 5,000+ posts]

if you after SPL, I would maybe conside tuning a little higher

 

 

if you want you can check out the Offical SoundSplinter Forum