Wragold
10+ year member
Senior VIP Member
I dont have enough room in my truck to go 37'' long, I only have 31''. So could I take the 6'' and make it 20'' Wide and still have the same sound?
-
2Participant count
-
Participant list
-
Wragold
Trixter
10+ year member
Keepin it Simple
if you take away from one side you need to add that volume by extending another side in order to maintain the same tuning.
Activity
No one is currently typing a reply...
Similar threads
I'm trying to do 4 18 inch resilient sound platinums in a cpillar flat wall .4 to 5 cubes per was told they like 12 to 16 inches per cube . I have...
- Started by Bass so loud it HZ
- Enclosure Design & Construction
Yeah I'm in a circle right now too. I'm going to use 3/4" birch so I don't want to build it twice, stuff ain't cheap.
- Started by Grimmjoww
- Enclosure Design & Construction
Emphasis added.
The answer is, because you can also see DCR at other frequencies and because low impedance is extremely torturous on...
- Started by Grimmjoww
- Amplifiers
Common chambered sealed or ported is fine. Just make sure you have sufficient bracing
- Started by DuffelBagDustin
- Enclosure Design & Construction
Start by laying the larger bottom panel in an open space, then slowly “dry” assemble it by laying the pieces where they go like a puzzle.
It...
- Started by Mr FaceCaser
- Enclosure Design & Construction
About this thread
New threads
-
-
Has anyone used DataSat Amplifiers?I have a DataSat home theater system in my media room and I...- Started by Steve IZZI
- Replies: 2
-
I need Help picking the right amplifierAny recommendations for a 5 channel amp that has a 4 ohm f/r...- Started by Zach H
- Replies: 12
-
Advice: will I have enough high frequency quality / volume?I am planning out a system for my ‘04 Ram 1500 with the...- Started by Adam LaFountain
- Replies: 8
-
RCA output questionMy son is wanting to add a 4-channel amp to power his door...
- Started by RGKeller
- Replies: 8