Box plans. Correct? JMAC u out there?

[JoseMCeee 10+ year member]

This is going to be with .75 mdf wood. 2.3^3 @ 32 hz.

26 width x 14.5 height x 14 depth.

Port lenght of 29.75. It will go 11.5 in toward the back of the box, then 18.25 toward the side of the box.

Is this right? //content.invisioncic.com/y282845/emoticons/banghead.gif.8606515f668c74f6de0281deb475b6fd.gif

Click to read more...

 

[JoseMCeee 10+ year member]

29.16x13.5x15 (wxhxd)

Port: 12x2.5 (heightxwidth) = 30 sq in

29.75 inch port lenght

 

[JoseMCeee 10+ year member]

sound good? I might want to take off a little on the depth because and add it to the width, ima try that now... //content.invisioncic.com/y282845/emoticons/wacky.gif.cf4a48f9e6dfe9504ffd2c946fd2f340.gif

 

[JoseMCeee 10+ year member]

32x13.5x13.7 Thats the same amount or cube ft.

What ft^3 would it be with 32x13.5x13.5 after taking into acount the thickness and all the other stuff?

 

[brandontw 10+ year member]

you can calculate it..dont be lazy

 

[JoseMCeee 10+ year member]

well im not sure how to factor in the driver displacement and port displacement. By the way Jmac hit me up on aim if you can //content.invisioncic.com/y282845/emoticons/greedy.gif.5a53e6246569d7ab79867170f3b06629.gif