Box for2 jl 10w3v3

[rickvl 10+ year member]

What box size is good for 2 jl audio 10w3v3-4 ohms and which is better sealed or ported?My amp is a Alpine MRP-M850 800 watts RMS x 1 at 2 ohms, I will be wiring them to 2 ohms.I listen to classic rock/heavy metal. It's going in a 92 honda civic hatchback,so not alot of room in the hatch.

Thanks

Click to read more...

 

[Phoenix Risen 10+ year member]

for what you need just get a sealed prefab 2 10 box with around 1.2-1.5 cubes of airspace

since your not going for spl going with a port would just be overkill and sealed boxes are better for sq any way

just google it and you should be able to come up with something

 

[rickvl 10+ year member]

Thanks....I will do that.

 

[rickvl 10+ year member]

for what you need just get a sealed prefab 2 10 box with around 1.2-1.5 cubes of airspacesince your not going for spl going with a port would just be overkill and sealed boxes are better for sq any way

just google it and you should be able to come up with something

If I wanted to try a ported box whats the best size?

 

[Phoenix Risen 10+ year member]

if doing a ported is is usually best to build it, as it is usually hard to find one that is tuned to what you need for what your doing. you need a box with 2.25 cubes and a port tuned to 32. you can usually find someone on here to design the box. im not good at doing that so i usually dont try it for anyone. i saw a post on here not to long ago that someone was designing them to test out some new software, not sure if thats still going, but im a design wouldnt be all that hard to come up with

 

[Phoenix Risen 10+ year member]

http://www.caraudio.com/forum/enclosure-design-construction-help/484891-%247-box-designz-cutlists-next-48-hours-pm-email-me.html

just saw this thread, and figured it would be a little help for ya if ya want to build a box for your setup or have one built.

 

[rickvl 10+ year member]

http://www.caraudio.com/forum/enclosure-design-construction-help/484891-%247-box-designz-cutlists-next-48-hours-pm-email-me.html
just saw this thread, and figured it would be a little help for ya if ya want to build a box for your setup or have one built.

Thanks.

 

[rickvl 10+ year member]

if doing a ported is is usually best to build it, as it is usually hard to find one that is tuned to what you need for what your doing. you need a box with 2.25 cubes and a port tuned to 32. you can usually find someone on here to design the box. im not good at doing that so i usually dont try it for anyone. i saw a post on here not to long ago that someone was designing them to test out some new software, not sure if thats still going, but im a design wouldnt be all that hard to come up with

Do you recommend the same size ported box for the 10W6V2? I just aquired one as the price was to good to turn down

Thanks.

 

[Phoenix Risen 10+ year member]

for a single 10w6 do .65 sealed or .75 ported still tuned to around 32,

 

[Cruzer 10+ year member]

this is wat jl recommends

JL Audio: Products