box for my maw12

[g0t-milk 10+ year member]

would this be ok?

http://www.subwoofertools.com/forum/ported-box.asp?Ew=32&Eh=16&Dia=6&Xmax=13&Vd=1&NumW=1&Vb=2&Fb=34&Qts=0.27&Vas=76.6&Fs=23.3&CE=1.5

Click to read more...

 

[denim 5,000+ posts]

You can ask Mach5 directly on their forum. //content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[jdawg 5,000+ posts]

I would go more around 2.5cu ft, tuned to 32, and add some xmax to make the port bigger than 1 3/4" wide. Set the xmax to 18 or so. But yea they have their own forum

 

[jmanpc 5,000+ posts]

If you'd like I could make a box design for you in sketchup

 

[dragnix 5,000+ posts]

I would go more around 2.5cu ft, tuned to 32, and add some xmax to make the port bigger than 1 3/4" wide. Set the xmax to 18 or so. But yea they have their own forum

//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif how do you add or set the xmax

 

[jdawg 5,000+ posts]

in the box that says "woofer xmax" you have 13, if you increase that number it increases your port width, I know the website for the maw12 says 13mm, but that is how the program controls port witdh. Also I doubt that woofer has a displacement of 1cu ft, prolly more like .3 or something

 

[phantom240 5,000+ posts]

srsly. Hopefully hes talking bout int he design program where the xmax helps determine port size.

 

[dragnix 5,000+ posts]

Oh okay then, that makes sense //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[jeremiah 10+ year member]

in the box that says "woofer xmax" you have 13, if you increase that number it increases your port width, I know the website for the maw12 says 13mm, but that is how the program controls port witdh. Also I doubt that woofer has a displacement of 1cu ft, prolly more like .3 or something

it's 0.23

 

[jeremiah 10+ year member]

http://www.subwoofertools.com/forum/ported-box.asp?Ew=32&Eh=15&Dia=6&Xmax=15&Vd=0.23&NumW=1&Vb=2&Fb=32&Qts=&Vas=&Fs=&CE=1.5

//content.invisioncic.com/y282845/emoticons/wink.gif.608e3ea05f1a9f98611af0861652f8fb.gif

 

[Blove1991 10+ year member]

Didnt Ngsm prove that Subwoofertool was off with its port tuning?

 

[jeremiah 10+ year member]

Didnt Ngsm prove that Subwoofertool was off with its port tuning?

by how much?????//content.invisioncic.com/y282845/emoticons/eyebrow.gif.fe2c18d8720fe8c7eaed347b21ea05a5.gif

 

[Blove1991 10+ year member]

Idk, But considering he made it publc to the forum, I geuss it was enough, Im not positive

just an //content.invisioncic.com/y282845/emoticons/fyi.gif.9f1f679348da7204ce960cfc74bca8e0.gif