box designer wanted will pay $$ for good plans and advice from a pro

[bumpinhooptie]

Just what the title says. I want to ad a sw to my 13 KIA optima using a limited amount of space in the trunk. I have a workshop and plenty of woodworking ability so I would like to get plans and advice on a driver. At this point I am interested in either one 10 or 8 inch sub. Please reply or PM me if you have plenty of experience and can help. Or if you can recommend someone, please do.

Click to read more...

 

[CSCStang]

[quote name='bumpinhooptie']Just what the title says. I want to ad a sw to my 13 KIA optima using a limited amount of space in the trunk. I have a workshop and plenty of woodworking ability so I would like to get plans and advice on a driver. At this point I am interested in either one 10 or 8 inch sub. Please reply or PM me if you have plenty of experience and can help. Or if you can recommend someone, please do.[/QUOTE]
@skdooley ;

 

[I'mPoor:(]

I can draw you free plans.

 

[bumpinhooptie]

Here are some measurements. I should probably start a build thread. But I want to get the right person interested in doing this. That's not to say the few people that did aren't considered. This is basically what I am working with. I only want to give up 1/3 of my trunk space for this. Including gear such as second battery(small one such as an xs750). I don't plan on upgrading my alternator, only big 3 and 4 gauge, possibly a battery isolator, and of course the amp. I would like the amp to look good so was considering putting it behind 3/8 acrylic with a good fan. I want to keep this system under 700 watts. At least for bass.

the overall trunk, never mind the snow.

This measurement shows the floor starting where the point that the top seat frame folds above. So I would say possibly 15" deep may be my max depth. Ill have to triple check this.

These next two illustrate 24 inches from trim to trim up top. This is the narrowest measurement reaching to the seat frame.

This measurement shows the height of the forward portion of the deck frame or seat frame. I need to measure the depth of this.

This shows the rear portion of the back deck. The lowest point is the OEM subwoofer. Removal would be considered if need be.

Some other shots worth seeing.

 

[Jeffdachef 5,000+ posts]

Wow thats very detailed! Now thats how you give others your trunk dimensions in a post! hats off to you lol!

 

[bumpinhooptie]

Dude, thanks for the compliment. I spent a good hour doing it. So, I hope it pays off.

Wow thats very detailed! Now thats how you give others your trunk dimensions in a post! hats off to you lol!

 

[I'mPoor:(]

Drawing be done by tomorrow.

 

[mclerico83 5,000+ posts]

Custom Sub Enclosure | Affordable Sub Box

great boxes for fair prices

 

[bumpinhooptie]

I appreciate that but what subwoofers are you configuring it for? Im looking at a pair of these ported.

HDS208

The problem is that they dont specify recommended volume , but they do provide every number necessary to figure it out.

Drawing be done by tomorrow.

 

[I'mPoor:(]

I will have two drawings one for a pair of 8s and one for one 10

Sent from my HTC One using Tapatalk

 

[bumpinhooptie]

I will have two drawings one for a pair of 8s and one for one 10
Sent from my HTC One using Tapatalk

I also have a line on a 12w7. It needs 1.75 ported' date=' I would like everything tuned to 33hz

12W7-3 - Car Audio - Subwoofer Drivers - W7 - JL Audio

 

[I'mPoor:(]

Those boxes need to be bigger. The JL specs are too small.

Sent from my HTC One using Tapatalk