Bakesbaked
10+ year member
Senior VIP Member
Hey there I'm going to be running 4 DD 2500 series 12" subs. On a crescendo BC 3500, in a 4 door tahoe z71 2004.. My question is where in the world do i start with making a box??? i want to go with ported, i want loud, but i want accurate bass too. i have winisd but that program is just confusing the heck out of me. so please if anyone could help... would be appreciated, i kind of want to go with a nice shower set up btw and here are the specs.
SPECIFICATIONS
BL 21
Cutout Diameter 7.16"
FS 40 Hz
Magnet Weight 160 oz
item 2508c
Mounting Depth (in.) 5.66"
Nominal Impedance D4.0 Ohm / D2.0 Ohm
Power Handling RMS/Peak 800/3200
QTS 0.55
QES 0.63
QMS 4.60
Suspension Travel 66 mm
VAS 6.2 l
Voice Coil Diameter 2.5" / 63mm
Woofer Diameter 8"
Cubic FT A B C D E F
2512 (CAST FRAME) 0.09 12.63 11.38 6.88 6.38 3 1.06
Mounting Data | DD Audio
SPECIFICATIONS
BL 21
Cutout Diameter 7.16"
FS 40 Hz
Magnet Weight 160 oz
item 2508c
Mounting Depth (in.) 5.66"
Nominal Impedance D4.0 Ohm / D2.0 Ohm
Power Handling RMS/Peak 800/3200
QTS 0.55
QES 0.63
QMS 4.60
Suspension Travel 66 mm
VAS 6.2 l
Voice Coil Diameter 2.5" / 63mm
Woofer Diameter 8"
Cubic FT A B C D E F
2512 (CAST FRAME) 0.09 12.63 11.38 6.88 6.38 3 1.06
Mounting Data | DD Audio
