box design for 1 memphis m3 dual 2 ohm ported

[memphis_vette 10+ year member]

what do u think i should run for spl

Click to read more...

 

[chinxtaboi 10+ year member]

i have the same questoin. memphis site suggest 2.0cubes tuned to 40. anyone have experience with them? specs on your box?

thanks

 

[brokeitagain 10+ year member]

dont build the boxes to memphis specs that is a huge waste of time. Good luck getting an answer or any real help from here. I have tried using suggestions from people on here and have found it to be a waste of time. And if u use moe lesters plans from the sticky check the math on them i didnt before i built my first box and they seem to be labeled wrong or the math is off.

I guess if u dont use DD,FI, or RE theres no help to be had?

 

[JDBuilder 10+ year member]

I can help. I was a Memphis dealer for seven years and will be happy to help you. I will shoot you botrh a PM.

 

[J31Rob 5,000+ posts]

SPL = 1.5-2 cube @ 40-42 hz. 4"/6" aero, external.

Instaloud!

 

[chinxtaboi 10+ year member]

but i want a lil sq too.. everyone says tune around 32hz.

 

[brokeitagain 10+ year member]

32 didnt work out to well for me but i was reccomended to try 2.25@37hz supposed to be loud but i am giving up on this again so i will not have the opportunity to try it out, if it works for u or if u even try lmk what u get

 

[30hrtz 10+ year member]

i had a 15 mojo in 4 cubes after port and sub disp. w/ 64 inches of port 16 in long w/ a large flare on the end of that.this box was crazy loud just on 500 watts.in my vehicle it peaked out at 30hz.not good for spl comps but it was an awesome setup.

 

[MemphisCherokee 10+ year member]

for strictly SPL?

do you understand that an SPL box is going to be useless for music?

if you want strictly fartbox spl i would suggest around 1.5 cubic feet tuned at around 55 hz.

the box will be hella small so you might as well just use an external port.