Box Build for 85 toy pu

[doinou 10+ year member]

Anyone got specs for one? Looking to put 2 10" ported and tuned to 32. I know I need 2.5 cu and want to be able to put the seat as far back as I can. The mounting depth is 4.75in. I came up with H=24 w=51 d1=5.5 d2=4 which give me 2.71 with 1/2 mdf. but have to cut out for hump in middle.

Click to read more...

 

[Max_Power 10+ year member]

I am no box expert so dont ask me any questions.....

everything sounds good (trusting your math, didnt do it) execpt motors and your port will take up quite a bit of that box. you have to account for them, or did you?

 

[doinou 10+ year member]

I am no box expert so dont ask me any questions.....
everything sounds good (trusting your math, didnt do it) execpt motors and your port will take up quite a bit of that box. you have to account for them, or did you?

That was gross figure. I use rockford site to do the math for me. I guess that's why I'm asking the question here. Box building and ported boxes are new to me. After reading on this site. Wish I knew half the stuff now like 6yrs ago when I use to have 4 15" in a sealed box. I guess I should of had them in a ported box now. I did well thought on a db outlaw though. My best was 158.6db