bolts for speaker terminals???

[treylittlefield 10+ year member]

what would u guys use for speaker terminals??? would just any bolt work and cut the head off of it?? suggestions are welcome //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

Click to read more...

 

[95BlackGA 5,000+ posts]

Something like that! Not sure if I completely understand what you're trying to ask though.

 

[SicAudio 5,000+ posts]

for a box? you can use just a threaded bolt but hell a terminal cup is cheap dude

 

[plugitin 5,000+ posts]

for a box? you can use just a threaded bolt but hell a terminal cup is cheap dude

i dislike terminal cups, unless its really not a high powered setup.

 

[treylittlefield 10+ year member]

i dislike terminal cups, unless its really not a high powered setup.

yeah it'll have bout 5500-6000w on them...lol

 

[SSS 18734 5,000+ posts]

A good pair of binding posts isn't too expensive...

 

[SicAudio 5,000+ posts]

yeah high power i use stainless steel 1/4" bolts and t nuts you can get em at HD or lowes usually.

 

[treylittlefield 10+ year member]

..

 

[treylittlefield 10+ year member]

yeah high power i use stainless steel 1/4" bolts and t nuts you can get em at HD or lowes usually.

A good pair of binding posts isn't too expensive...

link?? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[spltuscon 10+ year member]

These are the best I've found...I've used them on every high power application I've done in the past 2-3 years and they are really good.

http://www.parts-express.com/pe/showdetl.cfm?Partnumber=091-1247

 

[pr-festiva 10+ year member]

i made some brass ones for groundpound4200 that were for double thick walls

 

[plugitin 5,000+ posts]

yeah, i get brass ones from work...//content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

 

[pr-festiva 10+ year member]

i get the brass and thread it my self,,going to be doing copper as soon as possible

 

[Spooney 10+ year member]

i've always done the good ol' drill a hole and run the wire through it and silicone it up deal myself. hard to get a much better connection than that. less connections/connectors = less resistance = more power(however small the difference might be)

 

[SicAudio 5,000+ posts]

link?? //content.invisioncic.com/y282845/emoticons/smile.gif.1ebc41e1811405b213edfc4622c41e27.gif

look on hd or lowes website?

i know they sell them in the hardware section

i aint wading thru a million pages to find a link i walk in and go right to them and buy them lol they are in the big plastic drawers that have labels on the front with pictures