blow through

[stangman67 10+ year member]

I agree lol. That would be sick. Same cone area as 4 12's

 

[smullen 10+ year member]

You guys rememember that Silver fullsize Silverardo I think it was, done by someplace like Superior Sounds, it had like 8 12" RE XXXs in the bed and like 10 or so Planet Audio amps... The whole truck flexed...

 

[taintedplay 10+ year member]

id like to do that but more subs equals more money. and i laready have 3 15s

 

[shields 10+ year member]

Tonneau cover and a properly installed boot seem to work well for every one i have every installed.

had a proper boot and tonneau cover but the seal on the boot started leaking from the pressure. is all i can assume. truck was a daily driver and after one year started having problem with water but this isnt just a road truck it sees off road too.

 

[Villeza1 10+ year member]

You guys rememember that Silver fullsize Silverardo I think it was, done by someplace like Superior Sounds, it had like 8 12" RE XXXs in the bed and like 10 or so Planet Audio amps... The whole truck flexed...

Yea, that shit was insane

 

[MONSONwarrior Premium Member]

Sound N logic | Facebook

there's a blowthrough that didn't take up too much space.

 

[MONSONwarrior Premium Member]

Sound N logic | Facebook

there's a blowthrough that didn't take up too much space.

 

[audioholic 5,000+ posts]

The box wouldn't have to have the height to accommodate the sub diameter throughout the enclosure's entire length. The box could be 15" tall (more like 20) just at the front of the box where the subs are, then steps down to a lower height where it extends back to the rear of the bed. Pretty simple really. But I think Id rather just have a 'normal' box pushed up agaisnt the front of my bed... unless I had a dirtbike or something I guess.

 

[hatedonmostly 5,000+ posts]

this entire idea is retarded.

 

[CL1CKCLACK 5,000+ posts]

why not make the box the height of the bed. but only make it half the length. then put a tonneau cover over it

 

[hatedonmostly 5,000+ posts]

why not make the box the height of the bed. but only make it half the length. then put a tonneau cover over it

this.