Best 10 Setup with limited space??!

[nissane2w 10+ year member]

Im Looking at Re SX 15.. I can get it for 350 Shipped on Ebay! How Do you think this would sound in there?!!! Also Should i get him to do it Upfiring, or firing towards the back of my seat?!!!

 

[req 5,000+ posts]

it would get pretty loud with an SX and about 1kw.

i would prolly do it upfiring, ive seen lots of good success with upfiring and side ports in trucks.

just build it to RE specifications. i would prolly make it like 3 cubes and 35hz or so. do a search on RE SX box sizes. should be a wealth of info.

 

[Trancer 10+ year member]

I saw if you go with the SX, drop that down to 32 htz. Lower it gets, the louder it seemed to me.

 

[Justintoxicated 10+ year member]

If you take out the seat you can put whatever you want in there

Forward firing You also have alot of choices.

Under the seat with no lift I'd go for RLI's as well or TC1000's (Pretty much the same thing). But if you tell tech you want TC1000's he will probably laugh at you. I have them and they are bad *** off 1000 watts.

I'm still considering putting in 2 TC 10 OEM's no longer availabel in forward fire box since they are still sitting around BNIB... But I'm just not motivated to build new ampracks and a new Alternator to gain that additional 800 RMS of power over my current setup. Plus I like my seats to latch since I have a 4x4, I don't want the box or seats to be bouncing around in my Titan.

If you just want SPL, then I would go ported and remove the one seat for a big azz sub. Fire the port towards the rear doors. (But this would kind of not really be going with the thread topic.)

 

[punch 10+ year member]

Umm, i would raise the complete backseat area, to make some more room, kinda like theatre seating for your passengers...

gotta watch the seat belt mounts and such but it's been done...