autotek mm1000.1 help

[05fronty 5,000+ posts]

anyone have one of these or this series? when i was playing some music off of the radio kindof loud, my amp cut off and then the power indicator wasn't on. i checked everything and noticed that when i cut it off and then on it would turn on and then the protect light would come on and then turn off. so i disconnected main power and now it works fine. what could be the problem? is a coil going bad in one of my subs or what? i ohmed them out and they are still saying good. this amp is dropped down to like .9 ohm due to my subs are reading like 3.7 per coil. thanks

Click to read more...

 

[Team WP Bill 10+ year member]

Sounds like a thermal shut down was the amp warm?

 

[05fronty 5,000+ posts]

no i just played it for like a minute

 

[05fronty 5,000+ posts]

anyone else i need to know if i need to get rid of this amp and buy something else.

 

[dipitydoo 10+ year member]

I would check the connection quality of the power/ground and remote cables first.

 

[05fronty 5,000+ posts]

I would check the connection quality of the power/ground and remote cables first.

all is good

 

[headbussaboi 10+ year member]

I'll give you $25 shipped right now. There is a blown chip inside by the transponders and modules next to the distributor and only place to get it is Korea. Might need new spark plugs too.